Operation Manual

10
Empty
Full
Power is running
out, change the
batteries.
Low
Polarity direction
Step1 Step2 Step3
Installing the Batteries
1. Open the SD card slot/battery cover in the direction of the arrow.
2. Put the batteries in.
3. Clock the cover.
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. We recommend the use of NI-MH batteries, which have longer lives
than alkaline batteries. NI-MH batteries are rechargeable, alkaline
batteries are not.
2. Remove the batteries if you aren’t going to use the camera. Don’t
short,disassemble or throw the batteries into a fire.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Battery Condition
As the battery is depleted, the indication changes as follows.
9300 Eng Manl(1-49p 25/3/03, 3:14 AM10