Operation Manual

6
GB
HOW TO READ
THE RF SIGNAL INDICATOR
The RF signal indicator shows the signal-receiving status of the main unit.
There are three possible forms:
The unit is in searching mode.
Transmission data are securely
registered.
No signals.
INTERRUPTED SIGNALS
The success of wireless data transmission may vary and is directly related
to the positioning of the remote rain collector and the environmental factors
of that location. Should there be difficulty in data transmission or should
the main unit display go blank, press [ SEARCH] to initiate a search signal
between the main unit and the Rain Collector unit.
If main unit remains blank verify that:
- The remote rain collector is still in place.
- The batteries of both the main unit and rain collector are good. Replace
if necessary.
- The transmission is within range and path is clear of obstacles and
interference. Shorten the distance if necessary.
Then press [SEARCH] again.
THE RESET BUTTON
To reset the main unit, press the Reset button using a blunt stylus to hold
down the button. All main unit settings will return to their original
default values.
TABLE STANDING OR WALL MOUNTING
Table-Standing :
Your unit comes with stand connector for connecting it to other modular
units.
STAND
CONNECTOR