User Manual (EU Version)

6 CHANNEL TRANSMITTER

DIGITAL PROPORTIONAL RADIO

CONTROL SYSTEMPROGRAMABLE SYSTEM

RF module update

This function is for updating the RF module.

Setup:

1. Connect the system via USB cable.

2. Press the wheel, the system will show a prompt, “ This will enter RF module update mode and

halt other functions” with an option to continue, Select “Yes”.

3. Open the software update on a computer . Select COM port , then press “Connect”.

4. Press “Open file” to choose the file and press “Write” to enter the update mode.

5. Restart your system.

Factory reset

Resets the system to factory settings. To reset enter this function, press the wheel then move the

wheel to select yes and press the wheel again.

Press and hold the wheel and move the wheel to select yes.