User Manual (EU Version)

System setup

ARM

The function ensures a model will not fly until a switches has been toggled.

Setup:

1. Use the wheel to select a switch or on, then press the wheel.

2. Use the wheel to select a channel.

3. Press and hold the wheel to save an exit, or press the cancel key to exit without saving.

User name

Set a username for your system.

Setup:

1. Use the wheel to select a character and press the wheel to enter it.

2. Press and hold the wheel to save and exit, or press the cancel key to exit without saving.

Trainer mode

This function allows you to connect 2 transmitters together. The system that enables the trainer

function will become the master, and will be able to override the system it is connected to (if the

slave is set to student mode). Usually this function is used by instructors to teach students how to

fly, they can give the student full control but can quickly step in if anything goes wrong.

Setup:

1. Use the wheel to turn trainer mode on then press the wheel.

2. Select a switch to control the trainer mode (The student will only have control when this switch

is in its active position).

3. Press and hold the wheel to save and exit.

6 CHANNEL TRANSMITTER

DIGITAL PROPORTIONAL RADIO

CONTROL SYSTEMPROGRAMABLE SYSTEM