User's Manual

© 2007 Verizon. All Rights Reserved.
14
Verizon One User Guide
Set Up Verizon One (cont’d)
Register Handset
Activate Base Unit
Activate registration mode on the base unit so
you can register the cordless handset.
1.
Return to the base unit.
2. Touch
Menu.
3. Tap Tools & Settings.
4.
Touch Network & Phone Settings.
5.
Touch Handsets.
6.
Tap Register Handset.
You’re done!
Register Handset to Base Unit
1.
Press the OK button on the handset.
2.
Use the navigation button to select
Register Handset and press OK.
3. Select Subscription and press OK.
4.
Select Base #1 and press OK.
5.
Enter 1111 as your PIN and press OK.
6.
After 3 seconds, the handset will
automatically register to the base unit.
7. To verify successful registration,
press
. A dial tone will be emitted from
the handset and it’s ready to place a call.
You’re done!
If there is no dial tone but the handset
successfully registered with the base, verify
that the base unit is connected to an active
telephone line and that this line is plugged into
the phone port on the back of the base unit.
Charge the Cordless Handset Battery
1. Place the handset into the cradle (either
way) so the contacts on the handset
touch the contacts on the base unit.
2. Allow the battery to charge for
approximately 12 hours before using it
for the rst time.
You’re done!