Owner's Manual

13
Connecting the DX-C390—Continued
With  (Remote Interactive) you can control the
DX-C390 together with your other -compatible
Onkyo AV components. With some Onkyo AV receivers
you can use one remote controller to control all your
Onkyo components and use the following special 
functions:
■ Auto Power On
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you turn on the DX-C390, the
AV receiver will turn on and select the DX-C390 as the
input source.
■ Direct Change
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you start playback on the
DX-C390, the AV receiver will select the DX-C390 as
the input source.
■ Auto Power Off
When you set an -compatible Onkyo AV receiver to
Standby, all other AV components connected via 
enter Standby as well.
■ Dimmer
When you dim the display brightness on an -compat-
ible Onkyo AV component, the displays on all other AV
components connected via  are dimmed as well.
To use the  functions, you need to connect one of the
DX-C390’s  connectors to an  connector on
another AV component in your system.
See the manuals supplied with your other -compati-
ble AV components for more information.
Notes:
• To u se  you must make an analog RCA/phono
connection between your DX-C390 and Onkyo AV
receiver even if they are connected digitally.
• The DX-C390 has two  connectors. You can con-
nect either one to your Onkyo AV receiver. The other
connector is for connecting additional -compatible
components.
• Connect the DX-C390’s  connector to only Onkyo
AV components. Connecting to other manufacturer’s
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may not
support the special functions described here.
 Connections
RCA/phono audio connecting cable
Mini Plug 3.5mm 1/8 in Audio cable (Mono)
(not supplied)
Hi-fi amp, AV receiver
CD
RL
To use  you must make an analog audio connection (RCA/phono)
between the DX-C390 and your other Onkyo equipment even if they are
connected digitally.
Disconnect the power
cord before making any
connections!
Coaxial IN
Coaxial cable (not supplied)