Operation Manual

20
Getting to Know the DV-SP1000/DV-SP1000E —Continued
■ Canadian Model
For detailed information, refer to the pages in parenthesis.
A
i.LINK S400 (AUDIO) (35)
These sockets can output up to
six channels and up
to 192 kHz/24-bit digital audio in
i.LINK format
and can be connected to the i.LINK
sockets
on a
compatible AV receiver or other component. The
actual output signal depends on the disc currently
playing. Since
i.LINK is a bidirectional connec-
tion, connected components can talk to each
other for optimal setup and perfectly synchro-
nized audio transmission.
B
RS 232
This bidirectional RS-232 port can be connected to
an external controller.
C
HDMI OUT (32)
This HDMI socket outputs digital video and audio
and can be connected to an HDMI input on a com-
patible TV or other component.
D
VIDEO OUT COMPONENT (Y, P
R
, P
B
) (30)
These sockets output component video and can be
connected to a component video input on a TV or
projector. They output only interlaced video.
E
VIDEO OUT S VIDEO (30)
These two sockets output S-Video and can be con-
nected to an S-Video input on a TV or projector.
F
VIDEO OUT VIDEO (30)
These two sockets output composite video and can
be connected to a composite video input on a TV or
projector.
G
DIGITAL 1 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio input on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There’s a coaxial output
and an optical output.
H
DIGITAL 2 AUDIO OUT (36, 38)
These sockets output digital audio and can be con-
nected to the digital audio inputs on a hi-fi amp, AV
receiver, surround sound decoder (Dolby Digital,
DTS), or other component. There’s a coaxial output
and an optical output.
I
REMOTE CONTROL (40)
These (Remote Interactive) sockets can be con-
nected to the sockets on other Onkyo AV com-
ponents for interactive control.
To use you must make an analog audio connec-
tion between the DV-SP1000/DV-SP1000E and
your Onkyo AV receiver, even if they are connected
digitally.
J
D.MIX AUDIO OUT (30, 31, 38)
These sockets output analog audio and can be con-
nected to a stereo analog audio input on a TV, hi-fi
amp, or other component. If the source audio is
multichannel (Dolby Digital, DTS, DVD-Audio,
SACD), they output a 2-channel downmix.
K
FRONT, SURR 1, CENTER & SUBWOOFER
AUDIO OUT (37)
These sockets output 5.1-channel analog audio and
can be connected to a 5.1-channel analog audio
input on an AV receiver, surround sound decoder
(Dolby Pro Logic), or other component.
L
SURR 2 AUDIO OUT (37)
These sockets output the same analog audio as the
SURR1 outputs and can be connected to the analog
surround back left and right inputs on a 7.1-channel
AV receiver or other component. When using these
sockets, the SURR MODE switch should be set to
1+2.
OUT
AC INLET
D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
SUB
WOOFER
REMOTE
CONTROL
VIDEO OUT
COMPONENT
S VIDEO VIDEO
Y
P
B
PR
1
+
21
RS 232
S400
(
AUDIO
)
SURR MODE
(
AUDIO OUT
)
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
MODEL NO. DV
-
SP 1000
YPB PR
COAXIAL OPTICAL OPTICALCOAXIAL
DIGITAL 1 DIGITAL 2
HDMI
AUDIO OUT
HD VIDEO OUT
COMPONENT
AUDIO OUT
K
7
N
O
L
J
9
45
6
1B 38
M