™ OneSpace is a Trademark of Comfort Products, Inc.
Shelf maximum weight capacity = 10lbs 2 of 6
PARTS AND HARDWARE LIST (50-SH0105) EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. PART DESCRIPTION STOCK NO QTY HARDWARE KIT STOCK # 51-SH0105HA PART A B C End Board Middle Board Shelf 51-SH0105A 51-SH0105B 51-SH0105C 2 4 5 DESCRIPTION QTY 1 M5x40MM 20 2 M3.5x35MM 2 3 Wall Anchor 2 4 Screw Cap 20 5 Allen Wrench 1 Extra Hardware Pack (1-4) 1 - READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING. - REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
ASSEMBLY INSTRUCTION (50-SH0105) STEP 1 side facing you and place it to the right of the End Board as shown. Using two Screws (1) screw the boards together with the Allen wrench (5). Then, attach one Middle Board (B) to the Shelf (C) using two Screws (1). #1 x 4 Pcs C #5 B A STEP 2 Using fourteen Screws (1), continue attaching the other four Shelves (C) and three Middle Boards (B) until all are attached. With the remaining two Screws (1) attach the other End Board (A) to the last Shelf (C).
ASSEMBLY INSTRUCTION (50-SH0105) STEP 4 End Boards (A) and mark the wall behind. Using a drill or a hammer and a nail, make holes in the wall where you have marked. Make sure the drill bit or nail that you use is smaller in diameter than the Wall Anchors (3). Insert the Wall Anchors, using a rubber hammer if needed. Align the shelf with the Anchors. Insert two Screws (2) through the holes of the End Boards and screw them into the Anchors.
• • • Every 6 months, check all screws to ensure they are tight. This product is California 93120 Compliant for Formaldehyde. PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers as shown by the original sales receipt.