™ OneSpace is a Trademark of Comfort Products, Inc. ASSEMBLY INSTRUCTIONS MODEL 50-LD0101SHLF SUPPLIER CODE: LDCZ Essential Book Case, White CUSTOMER SERVICE For fastest service on claims, requests for replacment parts, or questions, please visit our website at: www.comfortproducts.net/support e-mail: c ustomerser vice@comfor tproducts.net Keep your sales receipt as documentation of your ownership.
Overview
Parts List ITEM A B C D E F G H I J DESCRIPTION STOCK# Top 51-LD0101SHLFA Front Trim 51-LD0101SHLFB Left Wall 51-LD0101SHLFC Right Wall 51-LD0101SHLFD Back Trim 51-LD0101SHLFE Bracing Shelf 51-LD0101SHLFF Bottom Shelf 51-LD0101SHLFG Bottom Trim 51-LD0101SHLFH Back Panel (x5) 51-LD0101SHLFI Shelf (x3) 51-LD0101SHLFJ
HARDWARE KIT 51-LD0101SHLFHA ITEM# DESCRIPTION QTY 1 Calm Bolt 24 2 Cam Lock 24 3 Dowel 12 4 Peg 12 5 Feet Tacs 4 6 Backing Tape 4
STEP 1 Turn nine Cam Bolts (1) into the Left Wall and Right Wall each (C and D). Insert six Pegs (3) into each wall. Insert Feet Tacs (5) into the bottom of each wall.
STEP 2 Inset four Dowels (3) into the ends of the Top, Bottom Shelf, and Bracing Shelf (A, G, F). Turn four Cam Bolts (1) into the Top (A) and two Cam Bolts into the Bottom Shelf (G).
STEP 3 Push two Cam Locks (2) into the Front Trim, Back Trim, and Bottom Trim (B, E, and H). Place the Front and Back Trim (B and E) onto the Cam Bolts onto the Top (A). Place the Bottom Trim (H) onto the Bottom Shelf (G). Tighten cams by turning the Cam Lock 180 degrees using a screw driver. B E 2 2 2 2 A 2 1 H 2 2 G CAUTION: Do not overtighten cams.
STEP 4 Push Cam Locks (2) into one end of the Top, Bracing Shelf, and Bottom Shelf each, and into the attached Trim Pieces as shown. Then place onto the Cam Bolts in the Right Wall (D) as shown, and tighten. A 2 2 2 F 2 D G 2 2 2 2 2 NT O FR 2 1 CAUTION: Do not overtighten cams.
5 STEP Insert the Back Panels (I) into the provided slots, as shown.
STEP 6 Push Cam Locks (2) into the remaining holes as shown, then set the Left Wall (C) onto the shelf and tighten the Cam Locks. Next, apply the four strips of Backing Tape (5) where the Back Panels meet, to secure them together.
STEP 7 Mount the Drawer Sides (J and I) onto the Drawer Front (G) by first inserting two Cam Locks (3) each, and then sliding the Drawer Sides onto the Cam Bolts on the Drawer Front.
7 FINISHED
• • • • DO NOT stand on the desk. Do not use the desk as a stepladder. ed. Every 6 months, check all bolts and screws to ensure they are tight. This product is California 93120 Compliant for Formaldehyde. PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year.