Product Manual

ManualsBrandsOneida Air Systems ManualsDust CollectionDust Deputy DIY Cyclone Debris Separator for Wet/Dry Vacuums

The Original

D.I.Y Dust Deputy Owner’s Manual

AXD001004

Made in the USA

ZBM000036DIY / 1-2014

1.800.732.4065 www.oneida-air.com

Fire Hazards and Codes

Warning! Explosion and re hazard! Never vacuum ammable uids or gas, oil, alcohol, solvents, etc. Do not

operate near ammable uids or gas. Never vacuum warm uids or materials at more than 140 deg. F (60 deg.

C), such as burning cigarettes, ashes, glowing coals, etc.

Warning! Do not vacuum hazardous / carcinogenic dust unless a HEPA lter is installed.

Always keep lter cartridge clean so the vacuum operates properly.

Empty Dust Deputy waste can frequently. Never leave ammable material in your Dust Deputy or shop vacuum.

Oneida Air Systems makes every effort to accurately represent our products and prices, however OAS

reserves the right to make changes to products and prices at any time. As a manufacturer, OAS reserves

the right to change product specications at any time in an effort to achieve better quality products.

Returned Goods Policy

Buyer must inform O.A.S. of any shortage or damage, by so noting in writing, on the freight delivery bill prior

to signing to indicate receipt of shipment. All claims, including claims covered under the limited warranty, are

subject to inspection and investigation by O.A.S. O.A.S. reserves the right to inspect, investigate all returned

products before Buyer’s claim is settled. All products returned for a cash refund must be unused, resaleable and

purchased within 30 days. There are no refunds on ex hose, custom made components or partial kit items. Kits

must be returned in full (all components) for credit. There will be a 25% restocking fee applied to any returned

items. Buyer must call and get an RMA (Return Authorization Number). Merchandise must be shipped

to us prepaid.

Limited Warranty

Terms & Conditions

Oneida Air Systems™ warrants the products manufactured by Oneida Air Systems, for a period of 90 days or

more depending on the product, to the original purchaser from the date of purchase unless otherwise specied.

Purchaser is responsible for returning warranty items to OAS at their expense. All parts must be returned with

an OAS provided Returned Material Authorization Number (RMA#). Any shipment without an RMA will be

refused. Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All

electrical items such as magnetic starters, remotes, sensors, pumps and accessories are limited to 90 days.

Oneida Air Systems warrantees that the product will be free from defects in materials and workmanship. This

warranty does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs,

alterations, improper wiring or lack of maintenance. This is Oneida Air Systems sole written warranty and

any and all warranties that may be implied by law, including any merchantability or tness, for any particular

purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant or

represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so

warrants. In no event shall Oneida Air Systems’ liability under this warranty exceed the purchase price paid for

the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New York,

County of Onondaga.

ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR

PROPERTY OR FOR INCIDENTAL, AND CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES

ARISING FROM THE USE OF OUR PRODUCT.

Before Purchasing or Installing a dust collection system the buyer is cautioned to do so in accordance with

prescribed Federal, State, Local, OSHA, NFPA, and any other applicable codes or regulations relating to the

type of dust(s) you are collecting.

SOME TYPES OF DUST UNDER CERTAIN CONDITIONS HAVE THE POTENTIAL TO BE EXPLOSIVE.

Oneida Air Systems is not responsible for how the dust collector is used or installed. Dusts with deagration or

explosion risks, such as wood dust, may require additional safety equipment including but not limited to; vent-

ing, spark detection, suppression systems, back draft dampers or may require installation in an outside location

or in a protected area away from personnel. The customer assumes the responsibility for contacting their insur-

ance underwriter with regard to specic engineering controls or application requirements. (We suggest you

reference NFPA 664, 654 and 68 codes for more information) Oneida Air Dust Collection Systems may not be

suitable for some applications and are not designed to be used in explosive atmospheres. Oneida Air Systems

equipment should only be installed and wired by a licensed electrician following all applicable local and

national electrical codes.

AXD001004SD

US patent # US 7, 282, 074 B1

#7,282,074 C1

Dust Deputy design TM

US trademark Reg. No. 4,599, 918

Summary of content (4 pages)

PAGE 1
Terms & Conditions ZBM000036DIY / 1-2014 Oneida Air Systems makes every effort to accurately represent our products and prices, however OAS reserves the right to make changes to products and prices at any time. As a manufacturer, OAS reserves the right to change product specifications at any time in an effort to achieve better quality products. Fire Hazards and Codes Warning! Explosion and fire hazard! Never vacuum flammable fluids or gas, oil, alcohol, solvents, etc.
PAGE 2
System Start-Up Information Safety Instructions to be Strictly Followed. Read the installation and maintenance instructions as well as the recommended safety practices in this manual and your shop vacuum’s owner’s manual before assembling and using the Dust Deputy®.
PAGE 3
Adding Cyclones to Improve Performance D.I.Y. Kit Contents U.S. Patent #7,282,074 C1 Top View Plastic D.I.Y. Dust Deputy® - AXD001004 OR Plastic D.I.Y. SD Dust Deputy® - AXD001004SD This arrangement may be useful for very fine dust situations. Attach in Series Increases particle efficiency. Top View Your arrangement is only limited by your imagination! Attach in Parallel Same particle efficiency but increases CFM. 200 CFM 100 CFM 100 CFM With the D.I.Y.
PAGE 4
Assembly Instructions for D.I.Y. Dust Deputy® Additional Ideas for the D.I.Y. Dust Deputy® The Dust Deputy is made of static dissipating plastic*. Hose to Vacuum Hose to Tools Make sure larger diameter hoses are pushed up so they fit tightly over the inlet Gasket can be glued to bottom of bucket lid.