Datasheet

ManualsBrandsOmron Industrial Automation ManualsBarcode Scanner AccessoriesAssembly Cable

Hardware Required

Configurations

Item Description Part Number

1 MicroHAWK ID-20, MicroHAWK ID-30, or MicroHAWK ID-40 7ABX-YZZZ-LPPP

2 Cable, USB A to Micro B, 6 ft., ID-20 61-9000034-01

3 Cable, USB A to Micro B, 3 ft., ID-20 61-9000045-01

4 Cable, DB15 to BUS Power USB Type A, ID-30 61-9000043-01

5 Kit, Cable, DB15 to Ext. Power/RS-232 with Power Supply, ID-30 – includes 97-9000006-01 and 61-9000037-01 98-9000048-01

6 Power Supply, 5V – for use with cables 61-9000037-01 and 61-9000038-01 97-9000006-01

7 Cable, DB15 to Ext. Power/RS-232, ID-30 61-9000037-01

8 Kit, Cable, DB15 to Ext. Power/USB with Power Supply, ID-30 – includes 97-9000006-01 and 61-9000038-01 98-9000049-01

9 Cable, DB15 to Ext. Power/USB, ID-30 61-9000038-01

10 Kit, Cable, DB15 to Ext. Power/USB, I/O with Power Supply, ID-30 – includes 97-000011-02 and 61-9000039-01 98-9000050-01

11 Power Supply, 100-240VAC, +5VDC, 2-Pin U.S./Euro Plug 97-000011-02

12 Cable, DB15 to Ext. Power/USB, I/O, ID-30 61-9000039-01

13 Power Supply, 100-240VAC, +24VDC, TRK 3-Pin, U.S./Euro Plug 97-000012-02

14 IB-131 Interface Box 99-000018-01

15 Converter, IC-332, 24V/5V, Opto I/O – for use with IB-131 FIS-0001-0035G

16 Cable, Communication, DB25 Plug to DB9 Socket, 6 ft. 61-3000026-03

17 Photo Sensor, Visible, NPN, Light On, 5VDC 99-000019-01

18 Cable, DB15 to USB/RS-232, Triggered, ID-30 61-9000102-01

19 Power Supply, 100-240VAC, +24VDC, M12 12-Pin Socket 97-000012-01

20 QX-1 Interface Device 98-000103-02

21 Cordset, Common, M12 12-Pin Socket (Screw-On) to M12 12-Pin Plug 61-000162-02

22 Cordset, Host, Ethernet, M12 8-Pin Plug (Screw-On) to RJ45, 1 m. 61-000160-03

23 Photo Sensor, M12 4-Pin Plug, NPN, Dark Off, 2 m. 99-000020-01

24 Photo Sensor, M12 4-Pin Plug, NPN, Dark On, 2 m. 99-000020-02

25 Cable, M12 12-Pin Socket to 9-Pin Socket and M12 Plug 61-9000054-01

26 Cable, M12 12-Pin Socket to USB Keyboard Wedge and M12 Plug 61-9000088-01

MicroHAWK

ID-20 / ID-30 / ID-40

Configuration Guide

USB Type A Plug

MicroHAWK ID-20 with Micro-USB Type B to USB Type A

MicroHAWK ID-30 with DB15 to BUS Power USB Type A

MicroHAWK ID-30 with DB15 to Ext. Power/USB Type A

To Host

Micro-USB

Type B Plug

2 or 3

Integrated

Corner-Exit

Cable

Accessory USB

Cable to Host

To Host

Integrated

Corner-Exit

Cable

Accessory USB

Cable to Host

Power Supply

Note: BUS-powered cable delivers reduced illumination –

approximately 30% less brightness.

Summary of content (6 pages)

PAGE 1
MicroHAWK® ID-20 / ID-30 / ID-40 Configuration Guide Hardware Required Item Description Part Number 1 MicroHAWK ID-20, MicroHAWK ID-30, or MicroHAWK ID-40 7ABX-YZZZ-LPPP 2 Cable, USB A to Micro B, 6 ft., ID-20 61-9000034-01 3 Cable, USB A to Micro B, 3 ft., ID-20 61-9000045-01 4 Cable, DB15 to BUS Power USB Type A, ID-30 61-9000043-01 5 Kit, Cable, DB15 to Ext.
PAGE 2
MicroHAWK ID-20 / ID-30 / ID-40 Configuration Configurations (continued) MicroHAWK ID-30 with DB15 to Ext. Power/RS-232 To host 7 Integrated Corner-Exit Cable 6 1 Power Supply MicroHAWK ID-30 with DB15 to Ext.
PAGE 3
MicroHAWK ID-20 / ID-30 / ID-40 Configuration Configurations (continued) MicroHAWK ID-40 with QX-1 Interface Device 1 21 22 Common (12-Pin Plug to 12-Pin Socket) 20 To Host (Ethernet 8-Pin Plug to RJ45) QX-1 To Power Supply 19 To Trigger 22 or 23 MicroHAWK ID-40 M12 12-Pin Socket to 9-Pin Socket and M12 Plug To Power Supply (19) or: Flying Lead Cable (61-000167-02); QX-1; MS-Connect 210.
PAGE 4
MicroHAWK ID-20 / ID-30 / ID-40 Configuration Power Requirements and Pin Assignments MicroHAWK ID-20: 5VDC ± 5%; 350mA at 5VDC (typ.) MicroHAWK ID-30: 5V ± 5%; 600mA at 5VDC (typ.) MicroHAWK ID-40: 4.75V – 30V; 150mA at 24VDC (typ.) Important: See the MicroHAWK ID-20 / ID-30 / ID-40 User Manual for information about Microscan’s Isolation Mounting Kit (P/N 98-9000064-01) to eliminate ground loops or other external electrical noise through your MicroHAWK ID-30 or ID-40 reader.
PAGE 5
MicroHAWK ID-20 / ID-30 / ID-40 Configuration MicroHAWK ID Accessories MicroHAWK ID-30 Connectivity Kits 98-9000048-01 Kit, Cable, DB15 to Ext. Power/RS-232 with Power Supply, ID-30 – includes 97-9000006-01 and 61-9000037-01 98-9000049-01 Kit, Cable, DB15 to Ext. Power/USB with Power Supply, ID-30 – includes 97-9000006-01 and 61-9000038-01 Kit, Cable, DB15 to Ext.
PAGE 6
MicroHAWK ID-20 / ID-30 / ID-40 Configuration MicroHAWK ID Part Number Structure MicroHAWK ID part numbers follow the format 7ABX-YZZZ-LPPP. 7 = MicroHAWK. Example Part Number: 7312-2000-1005 Description: MicroHAWK ID-30, Auto ID, IP54 Enclosure, 5V, USB, SXGA 1.2 Megapixel, Mono, High Density, Autofocus, Red Outer LEDs, High Speed X-Mode Decoder.