Operation Manual

➜

System Sounds (Beep)

Informs a button operation or a wrong operation of the recorder by

sound. System sounds may be turned off.

In Menu mode selection Beep OFF, Beep ON

Viewing System Information (System Ver.)

You can check the recorder's information on the menu screen.

Formatting the Recorder (Format)

If you format the recorder, all files will be removed and all function settings will return to

defaults except date and time settings. Transfer any important files to a computer before

formatting the recorder.

1 The Sub Menu opens.

2 Press the 9 or 0 to select “Format”, and press

“

Cancel” and “Format ” flashes alternately.

3 Press the 9 button.

After the “Data All Cleared” message is on for 2 seconds,

“Sure? Start” will turn on.

4 Press the

button.

Formatting begins and “Format DONE” displays when formatting ends.

s It may take up to several tens of seconds to finish the initialization. Do not remove the

battery or detach the battery compartment from the recorder during that time. Otherwise

data may be damaged.

s Never format the recorder from a PC.

s When the recorder is formatted, all the stored data, including locked files, are erased.

➜

LED (LED)

You can set it so the Record/Play indicator light does not turn on.

In Menu mode selection LED OFF, LED ON

➜

LCD Contrast Adjustment (Contrast)

Display contrast can be adjusted in 12 levels.

In Menu mode selection

You can adjust the LCD display

contrast level from 1 to 12.

➜

Recorder’s VersionSystem Information