User Manual

60
EN
Confi gurable functionsConfi gurable functions
indicates the default setting.
AF illum. mode: You can turn on the AF illuminator by controlling the
camera.
Auto (To use the AF illuminator) / Off (To turn off the function)
LED brightness: You can adjust the brightness of the LED light.
From 1/1 (brightest) to 1/8 to 1/32 (darkest)
EV step: You can change the adjustment increment for #+/- (fl ash
compensation/fl ash intensity).
1/3 / 1/2
Bounce zoom: You can manually confi gure ZOOM (fi ring angle) during
bounce fl ash photography, even when you have set ZOOM to A (auto).
From 12 to 75
x
You cannot confi gure this function when you set “Wide panel” to “On” and pull out
the wide panel.
Wide panel: The setting for ZOOM (fi ring angle) automatically becomes
7 mm when you use the wide panel (P. 48).
On (To turn on the function) / Off (To turn off the function)
Flash cable: You can select whether or not to use a fl ash cable.
On (To use a fl ash cable) / Off (To turn off the function)
x
When you select “On,” the RANGE (fl ash control range) display does not appear.
When you select “Off,” the RANGE display assumes that you have attached the
fl ash to the camera.
Zoom display: You can change the ZOOM (fi ring angle) display.
You can display the focal length for a Four Thirds lens or the focal length for 135
fi lm (35 mm fi lm).
FT (Four Thirds lens) / 135F (35 mm fi lm)
m/ft: You can change the unit on the RANGE (fl ash control range) display.
m (Meters) / ft (Feet)