User Manual

Shooting

Pro Capture Low (q)

The camera shoots at 10 fps. A maximum of 14 frames can be captured before the

shutter button is pressed all the way down. If [C-AF] or [C-AF+TR] is selected for

[K AF Mode] (P. 80), the camera will focus before each shot. Choose this option if

you anticipate that the distance to the subject will change during shooting.

Pro Capture High (p)

The camera shoots at up to 30 fps. A maximum of 14 frames can be captured before

the shutter button is pressed all the way down. The camera will use [S-AF] when

[C-AF] or [C-AF+TR] is selected for [K AF Mode] (P. 80). Choose this option if the

distance to the subject is unlikely to change very much during shooting.

Press the jY button.

Select p (Pro Capture High) or q (Pro Capture Low) using the front or rear

dial and press the Q button.

Take pictures.

• Capture starts when the shutter button is pressed

halfway. A capture icon ( ) will be displayed. If the

button is kept pressed halfway for over a minute,

capture will end and the Z icon will clear from the

display. Press the shutter button halfway again to

resume shooting.

• Press the shutter button all the way down to start saving

pictures to the memory card.

• Shooting will continue while the shutter button is

pressed all the way down, up to the number of shots

selected for [Frame Count Limiter].

Capture icon

S-IS AUTO

1:02:03

1023

250 F5.6

ISO-A

200

S-AF

0.0

• Selecting q (Pro Capture Low) restricts aperture to values between maximum aperture

and f8.0.

• Four Thirds and third-party Micro Four Thirds lenses cannot be used in q (Pro Capture

Low) mode.

• Flickering occurred by ﬂ uorescent lights or the large movement of the subject, etc. may

cause distortions in images.

• During capture, the monitor will not go dark and the sound of the shutter will not be heard.

• The slowest shutter speed is limited.

• [Max fps] (p/Pro Capture High only), [Pre-shutter Frames], and [Frame Count Limiter]

can be adjusted via the custom menus using the [jL Settings] and [jH Settings] [0]

options (P. 182).