User Manual

216
EN
Cautions
7
Wireless remote control ash photography
Wireless ash photography is available with compatible ash units that support
wireless remote control (RC). The remote ash units are controlled via a unit mounted
on the camera hot shoe. Settings can be adjusted separately for the camera-mounted
unit and units in up to three other groups.
RC mode must be enabled on both the master and remote ash units.
Enabling RC Mode
1
Set the remote ash units to RC mode and place them as desired.
Turn the external ash units on, press the MODE button, and select RC mode.
Select a channel and group for each external ash unit.
2
Select [On] for [#RC Mode] in X Shooting Menu 2 (P. 127), and press the
Q button.
The camera will exit to the shooting display.
• An q icon will be displayed.
q icon
P
S-IS AUTO
1:02:03
250 F5.6
ISO-A
200
0.0
0
S-AF
1023
30
p
30
p
4K
RC
L
F
3
Press the Q button.
The RC mode super control panel will be displayed.
The standard LV super control panel can be displayed
by pressing the INFO button. The display will change
each time the INFO button is pressed.
A Mode
TTL
Manual
Off
+5.0
TTL +3.0
1/8
LO
1
Ch
P
1:02:03
1023
250 F5.6
RC mode super control panel