User manual

Clearing paper jams> 164

• To remove a sheet from the central area of the

belt (2), carefully separate the sheet from the belt

surface and withdraw the sheet.

• To remove a sheet just entering the fuser (3), separate

the trailing edge of the sheet from the belt, push the

fuser pressure release lever (4) towards the front and

down to release the fuser’s grip on the sheet, and

withdraw the sheet through the drum cavity area. Then

allow the pressure release lever to rise again.

NOTE:

If the sheet is well advanced into the fuser (only a short

length is still visible), do not attempt to pull it back. Follow the

next step to remove it from the rear of the printer.