User manual

OLIMEX© 2013 OLIMEXINO-85 user's manual
CHAPTER 7: REVISION HISTORY AND SUPPORT
7. Introduction to the chapter
In this chapter you will find the current and the previous version of the document you are reading.
Also the web-page for your device is listed. Be sure to check it after a purchase for the latest
available updates and examples.
7.1 Document revision
Revision, date Changes Modified page
A, 27.11.13 Initial manual release All
B, 31.01.14
Adjusted manual to fit the changes
of the USB connector
Multiple
7.2 Board revision
Remember to check the schematics and the board design files to compare the differences.
Revision Notable changes
A Initial release of the board
B
1 USB mini connector was changed to USB type B
2 Added RST_E jumper (in open position by default) instead of
removing the RST pin from the extension.
3 R6(NA) pads are now added to the RST line just in case a
resistor is needed
7.3 Useful web links and purchase codes
The web pages you can visit for more information about your device are:
https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-85-ASM/;
https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-85-KIT/.
Page 20 of 22