User's Manual

31
SimpleSound Setup &
Other "Punch Throughs"
CUSTOMIZING
The bottom of the display flashes
“PUNCH TO”. Press the button
for the Component that doesn’t
have volume control commands
yet (i.e.,DVD). This is the Com-
ponent you are going to PUNCH
TO for the volume and mute
commands.
STEP 5:
The bottom of the display will
then flash “PUNCH FROM”. Now
select the Component that has
the volume commands you want
to use (i.e.,TV for systems using
the TV speakers, AUDIO for sys-
tems with surround sound
receivers). The bottom of the dis-
play will flash “SAVED”.
STEP 6:
Repeat STEPS 4-5 until all your
Components operate the volume
perfectly.
STEP 7:
Press the MAIN button twice to
return to normal operating
mode and test your SimpleSound™
settings.
Simply perform the steps outlined
above, but in STEP 4, press one
of the control options (CH, PLAY or
VOD).
NOTE: If you want to PUNCH TO the MAIN
Component, press the POWER OFF button
at this time.
NOTE:The Punch Through feature is not
limited to volume and can also be applied
to channel selection or other functions. If
you find yourself switching to a particular
Component frequently to use a group of
controls, consider using Punch Through for
another group, as listed here:
VOL Volume Up,Volume Down
and Mute
CH Channel Up, Channel Down,
Previous Ch and Channel
(0-9) buttons.
PLAY Play, Stop, Pause, Rewind
and Fast Forward
VOD Guide, Menu, Info, Exit, Up,
Down, Left, Right, Select