50SWP26 26 cu ft LAWN SWEEPER U.S. Patent _ _ READAND No.
Safety A Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards, Obey all safety messages that follow this symbol to avoid possible injury or death, Read and understand tractor attachment. all safety rules and operating Follow all safety rules and operating instructions manufacturer when using attachment. instructions before using this provided by your tractor's Never allow children or untrained persons to operate tractor or attachment.
Carton Contents (xl) 45 (xl) 39 (xl) 42 (x2) / (x2) 26 (x2) 17 (xl) 3(xl) 6 (x2) 4_9 (x2) 31 (x2) 50 (x2) 53 (x2) 38 (x8) 27 (x4) 54 (x2) 30 (x2) 32 (x3) TOOLS REQUIRED • 60 (x4) FOR ASSEMBL 9/16" Wrench Y: and Socket 2 28 (xlO) 29 (xl 1 )
11 Assembly Instructions Attach Short Hitch Tubes to Sweeper Assembly and tighten hardware. 27 DO NOT OVERTIGHTEN. _ Attach Handle to Height Adjustment and tighten hardware. Insert Long Hitch Tubes into Short Hitch Tubes and snap into position.
Assembly Instructions Install hardware through front two holes of Long Hitch Tubes as shown. Hold Adjustment Lever in position and install third bolt as shown. Pin Adjustment Lever to Handle. DO NOT TIGHTEN AT THIS TIME. _ 28 Install Clevis shown; Clevis boltstighten pass between Hitch Tube bolts. Tighten Hitch Bars Tube ashardware first, then Clevis hardware. Insert Bottom Frame Tubes into Rear Frame Tube and snap into position.
Assembly Instructions Slide Hopper Bar into pocket of Hopper Bag as shown. Place bottom frame assembly into Hopper Bag. Install Clevis Pins through Hopper Bag, Hopper Bar, and Bottom Frame Tubes and secure with Hairpins. 50 Insert Top Frame Tubes into Rear Frame Tube and snap into position.
Assembly Instructions Place top frame assembly into Hopper Bag. Install Clevis Pins through Top Frame Tubes and Bottom Frame Tubes and secure with Hairpins. 38 Slide Pivot Rod through Top Frame Tube and Connecting Tube, then through pocket of Hopper Bag, then through Connecting Tube and Top Frame Tube. Secure both ends with Washer and Hairpin. 4E Hold Hopper Bag open and carefully insert Tension Rods into holes in Rear Frame Tubes. Secure Hopper Bag around Top Frame Tubes with velcro tabs.
Assembly Instructions Insert Connecting Tubes into Short Hitch Tubes and secure with Quick-Release Pins. Install Hitch Pin and secure with Hairpin. ;4 Tie Dump Rope securely around exposed section of Rear Frame Tube.
Operating Instructions Before Using Lawn Sweeper: 1. Read all Safety Rules found on page 1. How to Sweep Lawn: 1. Remove large debris from lawn. 2. Do not sweep if conditions . are too wet or muddy. Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights; choose the appropriate setting so that Lawn Sweeper hitch tubes are roughly level with the ground. 4.
Operating Storing Instructions Lawn Sweeper: 1. Empty hopper bag and thoroughly 2. Store Lawn Sweeper away from excessive 3. Brushes must not contact ground during storage to prevent damage. 4. Remove quick-release 5. Carefully remove tension rods and collapse hopper bag for compact storage. 6. Detach adjustment lever from handle and depress snap buttons to remove hitch tubes from Lawn Sweeper for compact storage. Periodic clean Lawn Sweeper before storing.
Warranty If this product fails due to a defect in material YEARS from the date of purchase, we will at charge. This warranty excludes tires, wheels, expendable and become worn during normal This • • • or workmanship within TWO our option repair or replace it free of brushes and bag, which are use. warranty does not cover: Repairs necessary because of operator abuse or negligence. Equipment used for commercial or rental purposes. Paint that is worn or faded due to normal use or exposure.
Repair _ 29\ Parts ;( i___ 4 _., 38 _26_ _ ___'_\_ 14___16j \22 ITEM 1 PART NO 6000206 2 3 307119 307181 4 5 __ _9 \24 QTY ITEM PART NO Sweeper Housing Height Adjustment Handle 1 1 1 23 24 25 3000716 300065 307038 307113 307042 Adjustment Lever Clevis Bar, Flat 1 2 26 27 6 7 8 307043 307011 6000540 Clevis Bar, Offset 2 10 12 6000539 307241 Wheel (bushings included) Wheel Bushing Dust Cover 2 4 2 13 14 15 307125 307122 307121 Hub Cap Brush Axle Brush Bracket 16 17 30732
Repair Parts 64 65 4_ 67 61 66 ITEM PART NO 38 39 307083 307332 45 46 307062: 307053 47 49 50 307052 3000818 3000820 53 54 3000720 3000823 REPLACEMENT DESCRIPTION QTY ITEM PART NO Hairpin 6 55 307032 Connecting Hopper Bag Hopper Bar Pivot Rod 1 1 1 57 61 63 307361 6000208 6000235 Dump Rope Snap Button Owners Manua! 1 4 1 Tension Rod 2 64 307132 Clevis Pin, 3/8" x 1/2" Clevis Pin, 1/4" x 1-1/4" 3/8" USS Flat Washer Quick-Release Pin 2 2 2 2 65 66 67 307133 6000189 60008
INDUSTRIES Designed And Tested In Columbus, Ohio Manufactured In The U.S.A. From Domestic And Imported Components MODEL # 50SWP26 2575 Ferris Road Columbus, OH 43224 (800) 652-2321 www.