Instructions / Assembly

3121
2-TO-1 SYNCHRO TILT MANAGER’S CHAIR
OPERATING INSTRUCTIONS
LIMITED WarranTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
WarnInG
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEaTUrES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1)
up. To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment knob that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise to
increase tension and counter-clockwise to decrease
or ease the tension. To lock return chair to the upright
position and push lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms
to move up or down freely. Release the button (3) once the
desired height is reached
2
1
3
3121
FAUTEUIL INCLINABLE SYNCHRO 2 À 1
INSTRUCTIONS DE MONTAGE
© Office Star Products Mai 2013
2
1
12
3
4
10
10
9
11
8R
8L
6
7
5
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les
quantités des pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher. Insérer le vérin
pneumatique (3) dans la base (1) et glisser les soufflets (4) sur le vérin pneumatique (3).
ÉTAPE 2 Fixez la plaque du siège (5) au coussin du siège (6) avec la flèche vers l’avant de la chaise avec quatre vis pour plaque du siège (9). SERRER TOUTES LES
VIS POUR PLAQUE DU SIÈGE (9) AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Attacher les bras (8L et 8R) sur les supports sous le coussin de siège (6) et fixer à l’aide d’une bouton avec des rondelles (10) pour chaque bras (8).
RESSERRER COMPLÈTEMENT TOUS LES BOUTONS AVEC DES RONDELLES (10).
ÉTAPE 4 Fixer le support du dossier (12) à l’arrière du plaque du siège (5) avec des vis avec rondelles (11). SERRER TOUTES LES VIS AVEC RONDELLES (11)
AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
PIèCE QTÉ
1. Base .......................1
2. Roulettes ....................2
3. Vérin pneumatique ............1
4. Soufflet .....................1
5. Plaque du siège ...............1
6. Coussin du siège ..............1
7. Coussin du dossier ............1
8. Bras (8L et 8R) ...............2
9. Vis pour plaque du siège ........4
10. Bouton avec des rondelles .....2
11. Vis avec rondelle .............3
12. Support du dossier (pré-installé) . 1
13. Clé Allen (non montré) .........1