Submittal Sheet

Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
MODA
™
LAVATORY
OUTLET BOX
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey MODA
™
lavatory supply boxes shall be used in residential or commercial
applications requiring a supply valve recessed in the wall. The MODA
™
lavatory
assembly contains two 3/8" OD compression valves pre-installed in a PVC
box, connected by inter-locking wing anges that can be easily disassembled
and re-assembled. The wing anges shall allow installation on a single stud, or
between two studs using the included side brackets. No additional components
shall be required for a between stud installation. Valves shall be a two-piece
design, permitting eld replacement, and shall be secured with a stainless steel
retention clip. Valves are available with or without water hammer arrestors and
shall be installed upright or inverted. The assembly shall include an emergency
drain port for protection from supply hose leaks.
APPROVALS & LISTINGS
DIMENSIONS
[A]: Box Width 8.00" [E]: Bracket Length 8.00"
[B]: Box Depth 3.38" [F]: Faceplate Width 6.00"
[C]: Box Height 4.85" [G]: Faceplate Height 6.45"
[D]: Bracket Width 4.00" [H]: Faceplate Depth 1.25"
Accessory Components Included:
Side Brackets (2) Faceplate (1)
Sticker Cover
(For Debris Protection)
Faceplate Insert (1)
Valves
ASME A112.18.1 / CSA B125.1
NSF / ANSI 61 & 372
Water Hammer
Arrestors
ASSE 1010
Boxes IAPMO-Listed, PS-54
FEATURES & MATERIALS
Outlet Box
& Brackets
PVC
Valve Body Forged Brass C46500 No Lead (Chrome Plated)
Valve
Retention Clip
Stainless Steel
Valve O-Rings NSF/FDA Approved EPDM (2)
Temperature
Rating (Valve)
250° F / 121° C
Max Testing
Pressure
150 psi (Air) / 250 psi (Water))
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | Oatey.com
Access BIM/Revit content through www.oatey.com
LCS1292C 11/21