LEED Submittal Sheet

4675 W. 160
th
St. | Cleveland, OH 44135 | 216.267.7100 / 800.321.9532 | Fax: [phone] | www.oateyscs.com
Description of
Section’s
Relevance
Tinning Flux
Paste Flux
Liquid and Gel Flux
Product Offerings
Various products offered
by Oatey SCS® that apply
to information as follows.
 Oatey® No. 95 Tinning Flux
 Oatey® H-20®⁹⁵ Water Soluble
Tinning Flux
 Oatey® No. 5 Paste Flux
 Oatey® H-20®⁵ Paste Flux
 Oatey® Hot Weather Flux
 Hercules® Climate Smooth™
Soldering Paste
 Oatey No. 11 Liquid Flux
 Hercules® Jel-Flux™
Low Emitting
Materials- VOC
Emission Limits
Strictest VOC regulatory
limit in which governs the
above products.
There are no current VOC
regulations for copper pipe flux.
There are no current VOC
regulations for copper pipe flux.
There are no current VOC
regulations for copper pipe flux.
Low Emitting
Materials-
Product VOC
Content
Best estimate of the
actual VOC content within
product in g/L or % by
weight. Products with low
VOC content may assist in
earning LEED credit and
improving air quality.
No. 95 Tinning Flux- <4%
H-20®⁵ Paste Flux- 8 g/L
No. 11 Liquid Flux- 0 g/L
Hot Weather Flux- <10%
H-20®⁹⁵ Tinning Flux- <10%
No. 5 Paste Flux- <10%
Hercules Jel-Flux™- 0 g/L
Climate Smooth™- 14 g/L
Building Product
Disclosure-
Recycled Content
of Materials
Recycled content used
within product that may
assist in earning LEED
points.
There is no recycled content
present in these products.
There is no recycled content present
in these products.
There is no recycled content
present in these products.
PBT¹ Source
Reduction-Lead,
Cadmium,
Copper
Lead, Cadmium, and
Copper content for use in
determining LEED credit
for PBT reduction.
These products contain less than
1% copper by weight.
There is no lead, cadmium, or
copper content within these
products.
There is no lead, cadmium, or
copper content within these
products.
LEED Green Building Submittal Sheet- Copper Pipe Flux