Technical Specifications

PG8ACSL, PGACSL
Suggested Specification
Model PG8ACSL shall deliver 8.0 gph of 50°F water at 90°F
ambient and 80°F inlet water. Model PGACSL is a non-
refrigerated drinking fountain and delivers ambient water.
Models PG8ACSL and PGACSL shall include front and side
push pads to activate the flow of water. Basin shall be designed
to eliminate splashing and standing water. Water Saver Bubbler
shall reduce waste water by 50%. Bubbler shall have a flexible
guard and operate between 20 and 120 PSI. Cabinet finish
shall be Sandstone powder coated paint on galvanized steel or
brushed stainless steel. Cooling system shall use R-134a
refrigerant. Shall comply with ANSI A117.1 and ADA. Shall be
listed by Underwriters’ Laboratories to U.S. and
Canadian standards. Shall comply with ANSI/NSF 61.
Model
PG8ACSL delivers 8.0 gallons of chilled drinking water per
hour. PGACSL is a non-refrigerated fountain.
These models satisfy CABO/ANSI A117.1. When accessory
apron is used on the upper unit, this cooler will comply with
ADA guidelines when properly installed. Models also meet
guidelines for children’s accessibility providing the floor to
orifice height is 30 inches and proper clear floor space is
provided for frontal approach.
Standard Features
> Universal design includes a universal side access panel
and universal drain pipe
that allows the unit to be installed
left high, right low or
right high, left low
> Built-in 100 micron strainer stops particles before they
enter the waterway
> Waterways are Lead-Free in Materials & Construction
> Stainless Steel top
> Flexible, one-piece Water Saver Bubbler guard
> Heavy Duty galvanized steel frame
> NEW High Efficiency cooling tank and coil
> Refrigerant R-134a
> Product Certified to NSF/ANSI Standard 61,
Annex G (AB1953)
> Four push pad activation
> External stream height adjustment
Finishes
> Standard cabinet finish: Sandstone powder coated paint
on galvanized steel
> Optional finishes (at additional cost):
Stainless Steel, Regency Bronze, and optional powder
coated finishes
UNIVERSAL BARRIER-FREE VERSACOOLER
®
Energy and Water Conservation Technology
OR
Can be installed left high and right low…
right high and left low
Options
> Glass Fillers (factory installed)
> Push Handle (029603-004)
> Push Back (029603-005)
> Push Down (029603-006)
Installation
> Prior to roughing, consult with local, state and federal codes
for proper mounting height
> Shipped with complete instructions and wall mounting bracket
> Universal side access panel and universal drain pipe for
right high or left high installation included
> Removable side and front panels provide easy access for installation
ADA Compliant when installed in alcove or with right
wing wall, or with accessory apron.or with a right wing
wall for a right high unit or left wing wall for a left high unit.
Components in this fountain are lead free as defined by
the Safe Drinking Water Act Amendments of 1986, and
the Lead Contamination Control Act of 1988.
Powder Coated Finish Warranty (Continental limits of the United
States and Canada): Three years on the powder coat finish
provided that the water cooler has not been subjected to abuse,
misuse or alteration.
Limited 5-Year Warranty (Continental limits of the United States
and Canada): Five years on the sealed refrigeration system and
most component parts. Detailed warranty certificate enclosed with
each water cooler; sample available upon request.
Export Warranty: One year on the sealed refrigeration system and
most component parts. Four-year replacement contract on sealed
refrigeration system. Detailed warranty certificate enclosed with
each drinking fountain; sample copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted
average lead content of <=0.25%) and is in compliance with
California's Health & Safety Code Section 116875 (commonly
known as AB1953).
Models covered by this specification comply with all
known Plumbing Codes.
Listed by Underwriters’
Laboratories to U.S. and
Canadian standards.
**Specifications subject to change without notice
Model
Rated Capacity
GPH
50° F Drinking Water
90° F Ambient Air Temp*
Base Rate
GPH
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
Full Load
Amps
Rated
Watts
115 Volts, 60 HZ
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
PG8ACSL** 8.0 8.0 No No 1/4 3.1 286 Yes Yes 84 Lbs.
PGACSL Fountain Only Yes Yes 50 Lbs.
* Industry Standard Rating Condition 80° F inlet water temperature.
**Special export models available, operable on 220-240 volts, 50/60 Hz. Ul. CSA and ARI certification not available.
> Oasis Green Filtration
System
> Apron for Upper Unit
> Stainless Steel Bubbler