User manual

Section 2, Mounting the Oasis™ Heating Module
parts that may cause injury through accidental contact should be
protected.
Isolate the unit in a closed compartment so that no air from the
heater will infiltrate the living areas.
! DANGER
• It is recommended that a catchpan be placed under the Oasis™
Heating Module for containing any unexpected leakage.
• Choose a sturdy surface in a location that won’t be unduly
affected by vibration and the jarring of rough roads or rough
seas.
• Ensure that the exhaust tubing can be properly and safely
routed to the outside. The maximum exhaust run for the
system is 12’.
2.4 What NOT to Do
• Don’t mount the Oasis™ Heating Module in the rear of the
coach or yacht underneath the sleeping area. The sound of the
Oasis™ Heating Module cycling on and off may disturb light
sleepers.
2.5 Procedure
After choosing the mounting location for the Oasis™ Heating
Module, mount the module horizontally and level. Secure the
Oasis™ Heating Module in place (against the wall, floor or a
mounting platform) using eight (8) x 1/4” through bolts and 1”
diameter fender washers, lock washers, and nuts. (See Figure 2-2:
Module Mounting Brackets.).
2-4 The Oasis™ Heating Module