Operation Manual

216 Experiencing Multimedia
• Time Stamp (Photo and GPS Photo mode). Choose whether to include the
shooting date and time on captured photos.
• Storage. Select where you want to save your files. You can either save the files
to the main memory or to a storage card if one is installed.
• Keep Backlight. Turn the backlight on or off. This overrides your device
backlight settings while you are using the camera.
• Shutter Sound. Choose whether you want the camera to make a shutter
sound when you press the ENTER button.
• Image Properties. This option lets you adjust the image Contrast,
Saturation, and Sharpness.
1 Tap a property to adjust.
2 Tap to reset all properties to their default
values.
3 Tap to save the settings.
4
Tap
/ or press NAVIGATION right/
left (Landscape orientation) to increase/
decrease the value.
5 Tap to close the Image Properties screen
without applying and saving the changes.
2
3
4
1
5
• Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
• Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the centre area of the
subject, or Average to measure light using the area around the subject.