Operation Manual

Managing Your PDA Phone 215
To perform a hard reset using device keys
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the
same time, use the stylus to press the RESET button at the bottom of
your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you
see the following message on the screen:
This operation will delete
all your personal data,
and reset all settings to
the manufacturer default
settings. Press SEND to
restore manufacturer
defaults, or press any
other button to cancel.
3. Release the two SOFT KEYs, and then press TALK ( ).
Warning! Your device will be set back to factory default settings. Ensure any
additional installed programs and/or user data have been backed up before
a hard reset is performed.
Manage NAND Flash
Your device comes with a built-in 1GB NAND flash that gives you additional
storage space for your files. Use Format NAND Flash to delete all the files
in the NAND flash and to format it. You can also recover NAND flash if
you cannot find your NAND flash in the File Explorer. See the on-screen
instructions for further details.
Warning! As all of your data will be removed, ensure any additional installed programs
and/or user data have been backed up before formatting NAND flash .
To format NAND flash
1. Tap Start > Programs > Format NAND Flash.
2. Select Format NAND Flash in the list.
3. Enter 1234 in the box and tap Continue.
To recover NAND flash
1. Tap Start > Programs > Format NAND Flash.
2. Select Recover NAND Flash in the list.
3. Enter 1234 in the box and tap Continue.