manual

Customize settings
O&O CleverCache - 26
If the load on your file cache is light, it is possible to increase the assessment interval to a higher value.
Because the intervals are no longer so short, however, the file cache may need to rise temporarily above
the maximum value set by the user.
Note: Do not change the default settings, if you are not completely aware of the potential con-
sequences of those changes.
Light System Loads
When your system experiences only minimal system loads, you can set you file cache settings very low
because only a few number of files are read at any given time. Because of this, the strain on the file cache is
very low.
The following is a table containing guidelines for adjusting the file cache settings according to the size of
your main
memory.
Size of Main Memory Absolute Maximum Relative to Available Memory
512 MB 192 MB 100%
1 GB 348 MB 150%
2 GB 696 MB 200%
4 GB 1392 MB 200%
Normal System Loads
For systems with normal system loads, it is recommended to utilize one of the O&O AutoSense profiles.
This will take care of all of the necessary adjustments.
The following is a table containing some clues regarding the file cache settings according to the size of your
main memory.
Size of Main Memory Absolute Maximum Relative to Available Memory
512 MB 352 MB 100%
1 GB 704 MB 100%
2 GB 1408 MB 100%
4 GB 2816 MB 100%