Installation Guide

3. Remove LP orifice, then install the Rotisserie Burner NG Orifice
(NG part 2), (￠1.68mm) .
Remove the wind baffle
STEP FOUR: Change the Rotisserie /Infrared Burner Orifice
1.
UsingaPhillipsscrewdriver,removethe3screwsand
remove the rotisserie/infrared burner wind baffle.
2. Use wrench remove the nut on the orifice base.
A: NG Orifice for Rotisserie Burner( NG part 2)
B: LP orifice
4. IMPORTANT: Check that the orifice is properly installed the put on
the base nut and install the wind baffle.
15