Datasheet

PDTA143X_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 5 — 9 December 2011 3 of 17
NXP Semiconductors
PDTA143X series
PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 10 k
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
[3] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V
CBO
collector-base voltage open emitter - 50 V
V
CEO
collector-emitter voltage open base - 50 V
V
EBO
emitter-base voltage open collector - 7V
V
I
input voltage
positive - +7 V
negative - 20 V
I
O
output current - 100 mA
I
CM
peak collector current single pulse;
t
p
 1ms
- 100 mA
P
tot
total power dissipation T
amb
 25 C
PDTA143XE (SOT416)
[1][2]
-150mW
PDTA143XM (SOT883)
[2][3]
-250mW
PDTA143XT (SOT23)
[1]
-250mW
PDTA143XU (SOT323)
[1]
-200mW
T
j
junction temperature - 150 C
T
amb
ambient temperature 65 +150 C
T
stg
storage temperature 65 +150 C