Installation Sheet

WARNING:
• To reduce the risk of personal injury or property damage from re,
electric shock, falling parts, cuts/abrasions, and other hazards read
all warnings and instructions included.
• Before installing, servicing or performing routine maintenance on this
equipment, follow these general precautions.
• Commercial installation, service and maintenance of luminaries should
be performed by a qualied licensed electrician. If you are unsure
about the installation or maintenance of the luminaries, consult a
qualied licensed electrician and check your local electrical code.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
• Turn off electrical power at fuse or circuit breaker before wiring xture
to the power supply.
• All connections should be capped with UL approved wire connectors.
• Keep away from any corrosive substance.
• Use a dry cloth when cleaning xture.
• Not suitable for use in wet locations.
LED BACK LIT
FLAT PANEL FIXTURES
Models: 65/571, 65/572, 65/573, 65/581, 65/582
RECESSED INSTALLATION:
NOTE: Conrm size of xture to size of ceiling panel. Conrm
ceiling can support weight of xture. The xture must be fully
recessed into the channel. Space for adjustment cannot be more
than 1/8" (33mm) or xture will fall.
INSTALLATION:
SUSPENSION KIT INSTALLATION:
NOTE: Conrm ceiling can support weight of xture.
1. Replace existing light
xture with LED Panel.
1. Drill two holes in ceiling
and put anchors into hole,
then insert the wire rope
and screw.
2. Adjust the hanging wire
rope so the panel is in
a horizontal position.
1. Unscrew driver covers and connect conduit to driver box. 2. Connect coordinating wires. Secure driver covers to xture.
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xuture. Retain for future reference.
Suitable for recessed or suspension installation.
NOTE: Suspension installation kit available separately.
(2) 2ft./2 piece or (1) 4ft./3 piece, kits needed for installation.
Specications
Satco Products, Inc.
Bren twood, NY 11717© Copyright 2019 Satco Products, Inc. 9/19
Model # Size (ft.) Watts Volts CCT
65/571 2 x 2 40W 100-277V
3500K/4000K/
5000K
65/573 1 x 4 40W 100-277V
3500K/4000K/
5000K
65/572 2 x 4 50W 100-277V
3500K/4000K/
5000K
65/581 2 x 2 40W 100-347V
3500K/4000K/
5000K
65/582 2 x 4 50W 100-347V
3500K/4000K/
5000K
2. Use protective brackets for
safety. See diagrams A, B, C.
90º
90º 90º
90º
90º 90º
N(White)
DIM-(Gray)
DIM+(Purple)
L(Black)
Ground Wire
(Green)
N(White)
DIM-(Gray)
DIM+(Purple)
L(Black)
Ground Wire
(Green)
N(White)
DIM-(Gray)
DIM+(Purple)
L(Black)
Ground Wire
(Green)
N(White)
DIM-(Gray)
DIM+(Purple)
L(Black)
Ground Wire
(Green)
N(White)
DIM-(Gray)
DIM+(Purple)
L(Black)
Ground Wire
(Green)
Optional junction box accessory for
excess wires, available separately.
Set switch for desired
Kelvin temperature.
Anchors
Wire Rope 1
Wire Rope 2
Screw
Anchors
Wire Rope 1
Wire Rope 2
Screw
Anchors
Wire Rope 1
Wire Rope 2
Screw
90º
90º 90º
A. B. C. C. Alternate
Secure bracket with steel
rope through hole of bracket
and x to the ceiling.