User guide.
Important safeguards. Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet®. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.
Before blending hot ingredients, carefully examine the pitcher lid to make sure the vent slots are not obstructed or blocked. When blending hot liquids, add liquid and solid ingredients to your pitcher below their respective MAX lines. Attach the pitcher lid with the vented lid cap inserted and locked. Press POWER and begin blending by selecting the desired program or if you are using manual speeds, start blending on the LOW setting. Once ingredients are integrated, adjust speed as needed.
• DO NOT USE the NutriBullet® Smart Touch Blender™ for grinding dry ingredients such as grains, cereal, or coffee, as this may damage the motor and blade. PITCHER SAFET Y • Pitcher lid must be locked onto the pitcher in order to operate the unit. • With recipes that require certain ingredients to be incorporated during blending, first add the base ingredients, seal the pitcher lid with vented lid cap attached, and begin blending.
• Always POWER OFF and UNPLUG the NutriBullet® Smart Touch Blender™ when it is not in use or BEFORE assembling, disassembling, changing accessories, or cleaning. Do not attempt to handle the NutriBullet® Smart Touch Blender™ until all parts have stopped moving. • To unplug, grasp the plug and pull from the outlet. Never pull from the power cord. • Do not let cord hang over edge of table or counter, or touch hot surfaces. Do not pull, twist, or damage the power cord.
VENTILATION WARNINGS • To prevent a fire hazard, power base openings (underneath the motor base) should be free of dust or lint and never obstructed with flammable materials such as newspapers, tablecloths, napkins, dish towels, place mats or other similar type materials. • CAUTION! Always operate the NutriBullet® Smart Touch Blender™ on a level surface, leaving unobstructed space beneath and around the motor base to permit proper air circulation.
specify the machine model to ensure you receive parts that are compatible with your unit. • Always use genuine NutriBullet® replacement parts. After market parts are not made to NutriBullet’s specifications and may damage your unit or cause serious injury. • Periodically inspect all NutriBullet® components for damage or wear that may impair proper function or present an electrical hazard. Make sure that the power cord and plug are undamaged.
Contents. 10 What’s included 11 Assembly guide 12 Getting started 12 12 16 Blending control panel 16 18 20 Safety guide Pitcher assembly & use Manual speeds Intelligent programs Care & maintenance 20 21 How to clean the NutriBullet® How to store 21 Replacement parts 22 NutriBullet® Smart Touch Blender™ one-year limited warranty 25 Warranty registration Thank you for purchasing the NutriBullet® Smart Touch Blender™.
What’s included.
Assembly guide.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE: WARNING! Getting started. • Make sure the base is plugged in for use. • Never run the appliance while empty. • Appliance accessories are not intended to be used in the microwave as it may damage the accessories. Steam and splatters can escape through the vented lid, potentially causing scalding and/or burns. NEVER blend hot liquids in your pitcher without the pitcher lid and vented lid cap attached.
3 2 Place the lid on top of the pitcher and press down firmly until locked in place. Place the lid cap over the lid opening, then press down and twist until locked in place. Place the pitcher on a clean, dry, level surface. Add the ingredients to the pitcher, making sure they do not exceed the MAX line. NOTE: The blending pitcher is marked with two MAX lines: one for solid ingredients (higher line) and one for liquids (lower line).
NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the lid cap from the pitcher lid, leaving the lid attached. Add ingredients through the hole in the top of the lid, followed by the tamper if necessary. Replace the lid cap, then increase to your desired speed. DO NOT attempt to add items through the vent hole when blending HOT ingredients. 6 To begin blending, select a manual speed or program on the Blending Control Panel.
7 8 When you have reached your desired consistency, stop the appliance by pressing POWER . If you are using a program, you will hear a beep when the program has completed. Wait for the blades to stop turning. The unit will enter idle-mode. The timer will reset and the Blending Control Panel will remain illuminated. Press POWER again to turn off the unit completely and the illuminated display will turn off. Twist pitcher counterclockwise and lift off the motor base.
Blending control panel: manual speeds. TURNING ON/OFF The power button controls the master power of the appliance. When pitcher with pitcher lid is locked in place, pressing POWER will indicate the motor is powered on and the Blending Control Panel will illuminate. TIMER When using a blending speed: timer starts at zero (00:00) and increases during operation, showing time elapsed since blending began. When using program presets: timer counts down during operation until program is completed.
MEDIUM SPEED Use to cream soups, blend sauces and spreads, or mix dips. Also great for grinding nuts, making mixed drinks, powdered drinks or milkshakes. HIGH SPEED Use to liquefy thick mixtures and extract frozen fruits and vegetables into smoothies. TO SELECT A SPEED PULSE Press the desired speed once to turn on. The selected speed will illuminate and the rest of the speeds will dim. To toggle to another blending speed, press the inactive, dimmed speed desired.
Blending control panel: intelligent programs. PURÉES Delivers a perfectly smooth texture — ideal for dips, sauces and spreads of all kinds. SOUPS Blends sweet or savory ingredients into the silkiest of ready to heat soups and chilled gazpachos. NOTE: The Soup program does not heat the ingredients you are blending. FROZEN DRINKS Perfect for ice-blended mocktails or cocktails, and frappe style drinks. SMOOTHIES Easily turn fresh or frozen fruits and vegetables into sippable nutritious smoothies.
TO SELECT A PROGRAM Press the desired program to turn on. The selected program will illuminate and the rest of the blending control panel will disappear. The program will start to run, and timer will countdown until the program is complete. When the program is complete, there will be an audible alert and main blending control panel will be illuminated. To pause a program before completion, press the active program. The motor will stop and the timer will pause counting.
Care & maintenance. Here’s how to clean the NutriBullet®: STEP 1: The most important thing — ALWAYS POWER OFF THE UNIT and UNPLUG the motor base from the power outlet when it is not in use. Do not attempt to handle the appliance until all parts have stopped moving! This includes during assembly and disassembly, while changing accessories during cleaning, and any time you leave the machine unattended. STEP 2: Detach the pitcher from the motor base.
from a dish brush or sponge. The blades are sharp. Use caution to not touch blades while hand-washing pitcher. • Regularly check the structure of the pitcher and twisting threads for cracking, crazing, or breakage. If damaged, replace immediately to prevent possible personal injury. How to store: Store the NutriBullet® pitcher upright with the pitcher lid secured on top. Do not place anything on top of the pitcher lid.
NutriBullet® Smart Touch Blender™ oneyear limited warranty. LIMITED WARRANTY FOR NUTRIBULLET ® NutriBullet's limited warranty obligations are confined to the terms set forth below: NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet® against defects in materials and workmanship for a period of one year from the date of original retail purchase.
customer service department you will be asked for your name, address, telephone number and to provide proof of the original purchase (receipt) containing a description of the product(s), purchase date, and the appropriate NutriBullet® serial number(s). Before you send your product for limited warranty service please make sure to keep a copy of all relevant documents for your files (receipt, etc.).
(c) to a product or a part that has been modified in any way; (d) if any NutriBullet® serial number or trademark has been removed or defaced; and or (e) if the product has been used with an adapter/converter. THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.
Warranty registration. Please visit nutribullet.com/ warranty-registration or call 1 (800) 523-5993 to register your new NutriBullet® Smart Touch Blender™. You will be asked to enter the Serial Number* of your product, along with the purchase date and place of purchase. The registration will enable us to contact you in the unlikely event of product safety notification.
1 (800) 523-5993 | nutribullet.com NutriBullet, LLC | www.nutribullet.com | All rights reserved. NutriBullet® and the NutriBullet logo are trademarks of CapBran Holdings, LLC registered in the U.S.A. and worldwide. Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
