User Guide English ( 2 – 6 ) Guía del usuario Español ( 7 – 12 ) Guide d’utilisation Français ( 13 – 18 ) Guide per l’uso Italiano ( 19 – 24 ) Benutzerhandbuch Deutsch ( 25 – 30 ) Appendix English ( 31 )
User Guide (English) Introduction Box Contents MixTrack Platinum FX User Guide USB Cable Safety & Warranty Manual Software Download Card Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit numark.com. For additional product support, visit numark.com/support. Setup 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Place MixTrack Platinum FX on a flat, stable surface.
Features Top Panel 8 7 1 7 8 3 9 23 10 25 24 18 11 21 12 22 13 26 27 14 28 29 31 32 33 35 34 16 17 36 30 9 19 20 6 10 11 24 25 26 27 14 6 28 31 32 29 15 33 35 34 16 17 36 30 37 38 1. 18 12 13 5 4 2 37 38 Browse Knob: Rotate this knob to cycle through folders and tracks. Press the knob to cycle between the Crates and Library. Hold Shift and rotate the knob to quickly scroll through tracks and folders. 2.
19. Beats Multiplier: Increases and decreases the rate of the effects to the beat. When using a time-based effect, this knob adjusts its time division. 20. FX Wet/Dry Knob: Turn this knob to adjust the wet/dry mix of the effects. 21. Software FX: Press one of these buttons to select a software effect. • HPF (High pass filter) • LPF (Low pass filter) • Flanger • Echo • Reverb • Phaser 22. FX On / Off: Push up on the toggle switch to latch (lock) the FX in the on position.
35. Performance Pads: The top row of pads is used to trigger loop points or samples depending on the Pad mode setting. See Operation > Performance Pad Modes for more information. The bottom row of pads is used to trigger Stutter, Previous Track, Search Backward, and Search Forward: • Stutter: Repeats or “stutters” the sample when the pad is repeatedly tapped. • Previous Track: Goes to the previous track. • Search Backward: Searches backward through the current track.
Operation Performance Pad Modes The upper row of pads has different functions depending on their mode: Cue, Auto Loop Mode, Fader Cuts, and Sample Mode. To select a mode, press one of the Pad mode buttons and press one of the upper pads to activate a specific function. Cue Mode: Press the pad marked Cue and press a lit pad from the upper 4 pads to return a track to the assigned Hot Cue Point. Press an unlit pad from the upper 4 pads to assign a Hot Cue Point at the desired point in your track.
