Quick Start Manual

4
TOP PANEL FEATURES
M A X M I N M A X M I N
+10 d B -10 d B
+12 d B -12 d B
+12 d B -12 d B
+12 d B -12 d B
M A X M I N
M A X M I N
M A X M I N
M A X M I N
P G M C U E
+12 d B -12 d B
+12 d B -12 d B
+12 d B -12 d B
+12 d B -12 d B
+12 d B -12 d B
+12 d B -12 d B
+10 d B -10 d B
iCDMIX3
SEAMLESS
i P od D O CK AD J U S T M E N T
i P od C O N T R O L
RELAY
TRACK SELECTEJECTTRACK SELECTEJECT
6%
12%
24%
SCRATCH SEARCH
WHEEL MODE
KEYLOCK
AUTO BPM
6%
12%
24%
SCRATCH SEARCH
WHEEL MODE
KEYLOCK
AUTO BPM
ID3 TAP
+10
ID3 TAP
+10
1
2
34
56
7
10 11 12
13
14
15
232323
24242424
33
25
25
26
27
27
26
27
28 28
34
35
36
37
38
39
40
41
42
42
42
42 42
28
26
27
25 25 30
31
32
29 29 29
15
16
17
18
19 20 21
22
7
89
1
2
34
56
7
10 11 12
13
14
15 15
16
1719 20 21
22
7
89
1. EJECT – Pressing will open or close the disc tray on the transport.
2. JOG WHEEL – The jog wheel serves many functions depending on its current mode.
a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue point,
rotate the JOG WHEEL then begin playback when you have determined the proper position. Press CUE to return
to that cue point.
b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG WHEEL
clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is a useful tool for beat-
matching.
c) When the SEARCH button has been activated, rotating the JOG WHEEL will scan rapidly through the track.
d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the audio of the
track, like a needle on a record.
3. SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL creates a 'scratch'
effect. The LED indicator will be blue when Scratch Mode is active. (Note: This feature is not optimal for searching
through long audio passages. For longer searches, activate the SEARCH function.)
4. SEARCH – Pressing this button allows you to use the JOG WHEEL to rapidly scan through the music. The LED
indicator will be red when Search Mode is active.
5. CUE – During playback, pressing CUE will return to the cue point
and will pause the track. Holding down CUE will start playback from
the cue point, and releasing CUE will cause it to return to that point
and will pause the track. Also, if the track is paused, you can use
the JOG WHEEL to locate a new cue point.
6. PLAY / PAUSE – Plays or pauses the track. (Note: When paused, pressing PLAY will only set a new cue point if the
JOG WHEEL has been moved.)
7. TRACK SELECT – Used to select the track to be played.
8. FOLDER – Press this button to enter Folder Mode. The folder name will be displayed on the LCD. Here, you can press
and hold the FOLDER button and use the TRACK SELECT buttons to select a folder. Release FOLDER to enter the
selected folder. (When inside a folder, use the TRACK SELECT buttons to select track.) Press FOLDER again to exit
Folder Mode.
9. +10 – Press this button to skip through your CD track listing 10 tracks at a time.
10. LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.
11. LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While playing a loop, press
LOOP OUT to release it from the loop and continue normal playback.
12. RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).
13. PITCH – Activates or deactivates the PITCH FADER. You can also hold down this button and press the PITCH BEND –
/+ buttons to adjust the range of the PITCH FADER (±4%, 8%, and 16%). The current range will be indicated on the
LCD and by different LED colors.
14. PITCH FADER – The pitch can be changed by pressing the PITCH button so a PITCH LED is lit, then moving the sliding
fader. The pitch will not be changed if the PITCH LED is off.
15. PITCH BEND -/+ – You can use these two pitch bend buttons to temporarily adjust the pitch and tempo of the music.
To create a cue point, move the JOG WHEEL
when the track is paused. The cue point will
be set once you start playback from that point
(by pressing PLAY / PAUSE).