nstruction Manual Touch Control Ceramic Hob MODEL:CTM302D05G1
Touch Control Ceramic Hob CTM302D05G1 Installation Installation 2 3
GB IE Let's get started ... Getting started... 05 Safety Before you start 06 09 In more detail...
Getting Started ... Safety 06 Before you start 09 IE Getting started...
GB IE Safety Getting started... These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. • All installation work must be carried out by a competent person or qualified electrician. • This appliance must be installed correctly by a suitably qualified person, strictly following the manufacturer’s instructions.
Safety Make sure that the power cord is not caught under or in the appliance and avoid damage to the power cable. Do not install the appliance outdoors in a damp place or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry naturally. Please dispose of the packing material carefully. Do not use flammable sprays in close vicinity to the appliance. We also recommend that great care be taken during use and cleaning.
Safety Getting started... The Manufacturer declines all liability for personal or material damage as a result of misuse or incorrect installation of this appliance. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Before you start To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance. and contact the after sales service department.
In more detail... In more detail...
Operation The following shows how to reduce total environmental impact (e.g. energy use)of the cooking process). 1. Use suitable size of pan for cooking. 2. Cover the pan with lid if possible during cooking. 3. Choose pan which has better retaining heat capacity. 4. If possible, defrost frozen food in a way which does not need any power consumption. 5. It takes less time to cook food which has large surface area to volume ratio. In more detail...
,then from 0-9 in numberical order
120 120
Care and maintenance Warning Always switch off the electricity supply before performing maintenance work. In the event of a fault, contact customer services. OFF Care and maintenance Damaged power cables should be replaced by a competent person or qualified electrician. For domestic use only. Never place an empty pan on the hob as this will cause the over heat protection, then the appliance will switches off automatically.
Care and maintenance Avoid banging pots and pans down on the hob. The ceramic surface is tough but not unbreakable. Do not put detergents or flammable materials beneath the hob. Care and maintenance In more detail... Appliance cleanliness 16 Caution • Avoid rubbing with any abrasive or with the base of the pans, etc, as this will wear the markings on the top of the ceramic hob over time. • Clean the ceramic hob on a regular basis to prevent the build up of food residue.
E4 circuit open Please check which heating zone show "E4",then replace the thermocouple of the heating zone.If still show "E4",please replace the display board or contact supplier Please check which heating zone show F4 high temperature "F4",then replace the thermocouple of the heating zone.
Recycling and Disposal Before calling the customer services, please check that the appliance is correctly connected, any of the following cases are not covered by the guarantee In more detail... > Damage caused by improper use, storage or maintenance > Damage caused by unauthorised disassembly and repair. > Damage caused by misuse. > Using the ceramic hob for commercial purposes. Environmental Protection Waste electrical products should not be disposed of with household waste.
Technical and legal information All installation work must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood. Warning: THIS APPLIANCE MUST BE EARTHED .
Technical and legal information Electrical Requirements Any permanent electrical installation must comply with the latest I.E.E. Regulations and local electricity company regulations. For your own safety a qualified electrician or contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC) should undertake the electrical installation.
Appendix ... Appendix...
Installation Hob installation Caution The ceramic hob must be installed by a suitably qualified person. Never try to install the appliance yourself. The ceramic hob must not be installed above refrigerators, freezers, washing machines or tumble dryers. The wall and the area above the hob should be able to withstand heat. > Cut a hole in the worktop of the size shown in the diagram. The worktop should be at least 30 mm thick and made of a heat-resistant material.
Installation Clearance Warning Good ventilation is required around the appliance for easier dissipation of heat and low power consumption. Sufficient clearance is required around the appliance. The gap between the hob and any cupboard above it should be at least 750mm. If a cooker hood is to be installed above the hob please consult the hood instruction manual for this minimum distance. 650mm At least 150mm Appendix...
270 490 270 490
01 A B C D screw brack et Screw hole base 25
Notes
