Manual

DigiRail-VA
NOVUS AUTOAMTION 16/19
CONFIGURATION SOFTWARE
The software used for configuration of the DigiRail-VA is the DigiConfig (version 1.62 or higher). Besides the
configuration, it allows the verification of the input channel Reading and provides status information. This software is
supplied for free with the product CD and can also be downloaded at the manufacture’s website. Checking for updates
from time to time is recommended.
DigiConfig has a full help file with all of the necessary information for its complete usage, including the correct
configuration of the product configurations. To consult it, start the application and select the “Help” menu, or press the
“F1” key.
To begin configuring the DigiRail-VA, connect it to the computer (via USB or RS485) and select the "Communication"
option in the "Settings" menu. In the window that appears, select the correct serial port and configure the other
communication parameters. After applying the communication configuration, the system will be able to read the
configuration DigiRail-VA using the “Search” button located at the bottom left corner of the main window. To accelerate
the search, use the USB interface and use the option "Temporary". If you are using the RS485 interface and know the
equipment Modbus address, select only the "Starting Address" and enter the correct address. Once the equipment is
identified, it appears in the list on the left. Clicking on it will make the configuration data displayed on the right.
The configuration of the device is divided by functionality in several tabs. The choice of some options can affect the
limitation or absence of other configuration parameters. Last of all, the configuration should be applied to the equipment
using the Apply button.
The use of DigiRail-VA with full functionality is detailed in the chapter "Installation and Operation".
EQUIPMENT SOFTWARE (FIRMWARE) UPDATE
DigiRail-VA can update its internal software (firmware), allowing the benefits of new versions with new characteristics or
important improvements to be accessed without needing to send the equipment to technical assistance.
The latest update is available for download on the manufacturer website. The update process is done by DigiConfig,
using the related tab.