User's Manual Part 2

176 OEMV Family Installation and Operation User Manual Rev 5B
Appendix A Technical Specifications
A.8.2.2 13-Pin Deutsch to DB9 Null Modem Cable (NovAtel part number 01017822)
The null modem serial cable shown below provides a means of interfacing between the COM1 or
COM2 port on the FlexPak and another serial communications device, such as a PC. At the FlexPak
end, the cable is equipped with a 13-pin Deutsch connector (Deutsch part number: 59064-11-35SF),
which plugs directly into a COM port. At the other end, a RS-232 DB9S connector is provided. To use
this cable in RS-422 mode, you must cut the DB-9 connector off and make a cable to match the
COM2 port for RS-422, see Section 38, FlexPak COM2 Port Pin-Out Descriptions on Page 174. This
cable looks identical to the straight through serial cable, see Page 177, but its use and part number
differs. It is 2 meters in length.
Reference Description
1 13-pin Deutsch connector
2 DB9S connector
Figure 66: FlexPak 13-Pin Serial Cable
1
2
BROWN
BROWN/WHITE
GREEN
BLUE
GREEN/BLACK
RED
RED/BLACK
YELLOW/BLACK
ORANGE
WHITE
WHITE/BLACK
ORANGE/BLACK
BLUE/WHITE