User Manual

14
Minstrel 540
TM
User Guide Version 1
GU-01016914
Attaching the Minstrel to the Jornada
The Minstrel 540 attaches to the HP Jornada to create a single, integrated unit using a system
consisting of a footmount and a latch mechanism. The footmount is installed on the Jornada and
the Minstrel latches to this footmount to secure the unit in place. In order to configure and use
your wireless modem, attach the Minstrel to the Jornada as described below.
Installing the Footmount
To install the footmount, remove the top two screws on the back of the Jornada using the screw-
driver included in the Footmount Installation Kit. Next, place the footmount flat against the back of
the Jornada, with the hollow side facing down. Ensure that the holes in the footmount are aligned
with the newly opened screw holes on the Jornada. Insert the screws provided in the installation
kit through the holes in the footmount and into the holes on the Jornada. Tighten the screws with
the included screwdriver to secure the footmount in place.
NOTE: The screws provided in the installation kit must be used for installing the footmount. The
screws removed from the Jornada unit cannot be used. However, be sure to keep the
original Jornada screws in a safe place as they must be used in the Jornada if the
footmount is removed.