ValveS & CouplerS 2015 edition
Bolted Ball Valves A B Manufactured from glass re-inforced polypropylene for strength and durability – will never rust or corrode. Self-aligning ball rotates freely against Teflon® seats. Unique body-to-flange design allows for low torque on/off operation. Viton O-ring stem seal and EPDM O-ring body seal. Available with blue Norwesco handle or blank yellow handle. Pressure rated at 125 PSI @ 70˚F. All valves tested by air pressure under water.
Single Union Ball Valves Manufactured from polypropylene. Teflon® seats. EPDM O-rings (viton kits available). Pressure rated at 125 PSI @ 70˚F. All valves tested by air pressure under water. Recommended Operating Pressure A 100 PSI @ 0°F / 125 PSI @ 70°F / 70 PSI @ 150°F Item CODE DESCRIPTION Part No.
Cam Action Couplers and Adapters Manufactured from glass re-inforced polypropylene. Smooth operating stainless steel cam arms and pins. Standard with EPDM gaskets. Interchangeable with other couplers and adapters.
90˚ Cam Action Couplers and Adapters Manufactured from glass re-inforced polypropylene. Reduces the number of joints in piping applications. Smooth operating stainless steel cam arms and pins. Standard with EPDM gaskets. Interchangeable with other couplers and adapters. Pressure rating 125 PSI @ 70˚F. Recommended Operating Pressure 90˚A 100 PSI @ 0°F / 125 PSI @ 70°F / 70 PSI @ 150°F Item Code description 90˚A 90˚C 90˚D 90˚F SIZE AND PART NO.
Flange Ball Valves / Fittings Quick and easy assembly. No pipe tape or sealant necessary. Positive seals. Easy on/off hose connections. 360˚ orientation. Valves and fittings are manufactured from glass re-inforced polypropylene for strength and durability – will never rust or corrode. Valves Self-aligning ball rotates freely against Teflon® seats. Unique body-to-flange design allows for low torque on/off operation. Viton O-ring stem seal and EPDM O-ring body seal.
1" Fittings Item Code Description D E F G G G H I I I J J J K L M 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Flange Tee Elbow Coupling x ¾" MPT x 1" MPT x 1¼" MPT x 1" FPT x ¾" HB x 1" HB x 1¼" HB x ¾" HB 90˚ x 1" HB 90˚ x 1¼" HB 90˚ Cross Plug Plug with ¼" FPT 62912 62913 62914 63098 62915 63099 62916 62917 62918 62919 62920 62921 62922 62923 62924 62925 2" Fittings Item Code Description
A Schedule 80 Threaded Polypropylene Fittings Manufactured from glass re-inforced polypropylene for strength and durability. Schedule 80 design. Pressure rated to 150 PSI @ 70˚F. Recommended Operating Pressure B 120 PSI @ 0°F / 150 PSI @ 70°F / 90 PSI @ 150°F Tees 90˚ Street Elbows Item Code Description C A A A A A A A A ³⁄8" ½" ¾" 1" 1¼" 1½" 2" 3" Part No.
G Pipe Nipples Item Code Description ³⁄8" ½" ½" ¾" G ¾" H ¾" 1" G 1" H 1" 1¼" G 1¼" H 1¼" 1½" 1½" G 1½" 2" G 2" H 2" 3" H 3" 4" x x x x x x x x x x x x x x x x x x x x x Short Short 3" Short 4" 6" Short 4" 6" Short 4" 6" Short 4" 6" Short 4" 6" Short 6" Short Reducer Bushings Part No.
A Y-Line Strainers Manufactured from glass re-inforced polypropylene. Protects and prevents clogging of pipelines, pumps and spray tips. Easy access for cleaning. Sizes from ½" to 3". 6 to 80 mesh 304 stainless steel screens. Screen for 3" is polypropylene reinforced. Standard with EPDM gaskets. 3" strainer features a ½" drain plug in bottom of cap.
High Density Polyethylene Lids Item Code Description 22" Lid and ring with air vent 22" Lid, ventless with ring 16" Lid and ring with blue snap-in vent A 16" Lid and ring with 3" center thread 16" Lid, ventless with ring 16" Lid, ventless B 16" Ring only Ethafoam gasket for 16" non-hinged lid Blue snap-in vent for 16" lid (63485) 8" Lid with blue snap-in vent C Blue snap-in vent for 8" lid (63480) 8" Lid, ring and air vent (for 22 vertical and loaf tanks) 5" Lid with ball check air vent,
Polypropylene Bulkhead Fittings / EPDM Or Viton Gaskets Norwesco’s polypropylene fittings come standard with an EPDM gasket. Viton gaskets are available as an option when EPDM may not be suitable for your application. The 2" stainless steel bulkhead fitting comes standard without a gasket. DESCRIPTION hole size Required in tank for Installation Item CODE Part NO.
Bolted Fittings Polypropylene double threaded Bolted Fittings / EPDM or Viton Gaskets (Require two gaskets.) Bolted polypropylene fittings are equipped with 316 stainless steel bolts and come standard with EPDM gaskets. Viton gaskets are available as an option for the fittings.
A D E H P C Replacement Part Item Codes B Item Code DESCRIPTION Item Code DESCRIPTION A B C D E F G G G G H I J K L M P Flange End Flange with Teflon® Seat Teflon® Seat Large Body EPDM O-Ring Seal Valve Body Valve Ball Stainless Steel Lock Washer Stainless Steel Hex Nut Seat O-Ring G L K M F I J Stem Cap Screw Stem Flat Washer Valve Handle Viton Stem O-Ring(s)* Valve Stem with Viton O-Ring(s) Stainless Steel Bolt End Flange with Teflon® Seat Male End Flange with Teflon® S
Multi-Port Ball Valve Replacement Parts SIZE Repair Kit–EPDM O-Rings (3) and Teflon® Seats (2) ¾" 2" 61733 60435 Optional Repair Kit– Viton O-Rings (3) T-Ball Handles 60438 60442 60429 60428 Valve Stem with EPDM O-Ring 61735 61736 60452 60455 Single Union Replacement Parts Size Repair Kit–EPDM O-Rings (3) Repair Kit– Handles and Teflon® Seats (2) Optional Viton O-Ring (3) ½" ¾" 1" 1¼" 1½" 2" 3" 60430 60431 60432 60433 60434 60435 60436 * 60437 60438 60439 60440 60441 60442 60443 ** *
Norwesco Means Quality and Service Norwesco is your complete source for the highperformance products required in agricultural and industrial fluid handling applications. We take pride in our ability to respond quickly and effectively to your fluid handling needs with same day order processing. Our customer promise is three-fold: Dependable Service High Quality Products Affordable Prices Go with the flow Call Norwesco for your fluid handling needs. Norwesco, inc. 4365 Steiner Street P.O.
