Product Manual

Page 13 of 30
5. Install cap on filler neck.
Pre-Start Inspection
It is very important to do a visual inspection of the machine before beginning operation. This
inspection should include:
1. Check all decals and warning signs for damage.
2. Check engine oil.
3. Check and refill fuel tanks.
4. Check hydraulic lines and hoses for signs of damage or leaks.
5. Inspect the machine for any signs of damage or loose fasteners.
6. Check fluid levels and any signs of leaking fluid.
7. Conduct all daily service checks.
8. Check machine controls to make sure that they automatically return to the neutral position.
The following information presents details on these inspection points and service checks.
Activity
Daily (10 Hours)
Fuel
Check and fill
Engine Oil
Check and fill if low
Engine Oil Filter
Inspect for leaks
Engine Radiator
Inspect add if necessary
Air Filter
Check air filter dirt release
Fuel Filter
Inspect for leaks
Battery
Inspect terminals/leaks
Hydraulics
- Hydraulic Filter
- Hydraulic Fluid
- Hydraulic Hoses
Inspect for leaks
Check and fill if low
Inspect for leaks
Grease
Check