Product Manual B
At www.DawsBetterBuilt.com we have more Better Built® products and accessories. You can even shop online!
C s -n!
Grip Rite
®
Tool Box Mounting Instructions
a. Measure for location then mount Grip Rites to the truck bed rail as
shown in the illustration and on the Grip Rite package.
b. Set the tool box on the bed rail and sight down the front to determine
where the Grip Rite will line up under the front lip.
c. Measure from the front of the tool box to the sighted line where the
Grip Rite lines up.
d. Transfer the dimension just taken less ¼” (for inside compensation) to
the mounting surface inside the tool box.
e. The Grip Rite mounts have holes spaced 3 3/8” apart, and should be
marked as such along the line just made. These will be the locations
to drill the holes in your tool box.
f. Drill to a nish hole size of 3/8” at the locations just indicated.
g. Complete mounting the tool box to the Grip Rites using the allen head
screws and fender washers provided.
4. Note: Most Better Built
®
toolboxes have mounting holes ready
for installation, for those boxes that do not have holes please
follow the directions below for installation.
FAILURE TO SECURE THE TOOL BOX TO THE BED
RAIL AND THE SUPPORTING LEGS TO THE TRUCK
BED CAN RESULT IN THE BOX COMING LOOSE AND
FALLING OFF THE TRUCK BED RAIL.
SIDE MOUNT TOOL BOX MOUNTING INSTRUCTIONS
A Division of Daws Manufacturing Company, Inc.
R
A Division of Daws Manufacturing Company, Inc.
R