Network Router User Manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 9 HDLC configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 9-7
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=31 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/31/31 ms
Run the display ip routing-table command to check the correctness of the routing table.
[RouterA] display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 4 Routes : 4
Destination/Mask Proto Pre Cost Flags NextHop Interface
100.1.1.0/24 Direct 0 0 D 100.1.1.1 Pos1/0/0
100.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
----End
Configuration files
z
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol hdlc
ip address 100.1.1.1 255.255.255.0
#
return
z
Configuration file of Router B
#
sysname RouterB
#
interface Pos1/0/0
link-protocol hdlc
ip address 100.1.1.2 255.255.255.0
#
return