Network Router User Manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 7 LAPB and X.25 configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 7-33
The command adds the interface into a hunt group.
Step 4 Run:
channel xot ip-address
The command adds the XOT channel into a hunt group.
A hunt group can hold a maximum of 10 synchronous serial ports or XOT channels.
You cannot add the XOT channel into the hunt group that adopts vc-number channel.
----End
7.5.4 Configuring X.25 switching route
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] hunt-group hunt-group-name
The command adds an X.25 switching route whose forwarding address is a hunt group.
Step 3 Run:
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] interface serial number
The command configures an X.25 switching route whose forwarding address is an interface.
----End
7.5.5 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Display the X.25 switch
routing table.
display x25 switch-table svc { dynamic | static }
Display X.25 switch
PVC table.
display x25 switch-table pvc