Network Router User Manual

7 LAPB and X.25 configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
7-18 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
7.3.3 Configuring X.25 interface supplementary parameter
Do as follows on the routers.
Step 1 Run:
system-view
The system view appears.
Step 2 Run
interface serial interface-number
The interface view appears.
Step 3 Run:
x25 timer tx0 seconds
The timeout period of the procedure restart timer.
Step 4 Run:
x25 timer tx1 seconds
The timeout period of the call procedure timer.
Step 5 Run:
x25 timer tx2 seconds
The command configures the timeout period of the restore procedure timer.
Step 6 Run:
x25 timer tx3 seconds
The command configures the timeout period of the clearing procedure timer.
Step 7 Run:
x25 alias-policy match-type alias-string
The command specifies an alias for the interface.
Step 8 Run:
x25 ignore called-address
The command does not carry the called DTE address when a call is originated.
Step 9 Run:
x25 ignore calling-address
The command does not carry the calling DTE address when a call is originated.
Step 10 Run:
x25 response called-address
The command does not carry the called DTE address when a call response packet is sent.
Step 11 Run: