Network Router User Manual

6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
6-24 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
The interface view appears.
Step 3 Run:
ppp ipcp dns primary-dns-address [ secondary-dns-address ]
The command configures the DNS server address of the local negotiation.
By default, a router does not provide DNS server address for its peer.
----End
6.5.7 Configuring the PPP link quality detection
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The interface view appears.
Step 3 Run:
ppp lqc close-percentage [ resume-percentage ]
The command enables the PPP link quality detection.
Using the ppp lqc command, you can detect the quality of the low-speed line. The command
cannot be used on the high-speed POS interface.
----End
6.5.8 Configuring peer host router to be suppressed for adding
into the local end direct routing table
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The system view appears.
Step 3 Run:
ppp peer hostroute-suppress