Owner's manual

716 NT8D15 E and M Trunk card

In Option 11C systems, Table 284 "Insertion Loss from IPE Ports to IPE

Ports (measured in dB)" (page 716) shows the insertion loss from IPE port

to IPE port.

Table 284

Insertion Loss from IPE Ports to IPE Ports (measured in dB)

Paging trunk operation

When used in the paging mode, a trunk is connected to a

customer-provided paging amplifier system (not zone selectable). When

the trunk is accessed by dial-up or attendant-key operation, it provides a

loop closure across control leads PG and A. See Figure 243 "Paging trunk

operation" (page 717). In a typical application, this transfers the input of

the paging amplifier system to the transmission path of the trunk.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008