Owner's manual

284 NT5D33 and NT5D34 Lineside E1 Interface cards

Figure 62

Option 11C Mini chassis or Succession 1.0 MG chassis

3 Use an MGC Breakout Adapter for Option 11C (NTDW63AAE5)

•

Connect the adapter to 25 pairs MDF connector at Slot 0

• Connect the MGC DECT Clock Reference Cable

(NTDW67AAE5) to 15-pin DSUB connector on the Breakout

Adapter. Figure 63 "Option 11C Cabinet" (page 284) shows

the Option 11C Cabinet.

Figure 63

Option 11C Cabinet

--End--

Man-Machine E1 maintenance interface software

Description

The Man-Machine Interface (MMI) provides E1-link diagnostics

and historical information for the LEI system. See “Installation and

Configuration” (page 266) for instructions on how to install the cabling

and configure the terminal for the MMI. The following sections describe

the options available through the LEI’s MMI terminal and explain how to

set-up, configure, and use the MMI.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311 02.06 Standard

27 August 2008