Datasheet

AM 0055A (09262L) SWITCHING ADAPTOR SPECIFICATIONS
Ver: 1 Date: 2011-05-28 AMPLUS AM09262 Page
6
1
RD
1
SPECIFICATION
15. RELIABILITY TESTING
A. DC OUTPUT CORD PUSH/PULL TEST OF I/O CONECTOR SIDE
Test condition: 8kgf X10sec at Y axis; 5kgfX10sec at other 4 direction verticality
RESULT: No cutting inner wire is acceptable
B. DC OUTPUT CORD PUSH/PULL TEST OF ADAPTOR SIDE
Test condition: 8kgf X10sec at 5 direction verticality
RESULT: No cutting inner wire is acceptable
C. CORD BENDING TEST OF I/O CONECTOR SIDE
Test condition: 60’+60’=1 cycle, 30 cycle/1min, weight = 200g ,
from step 1 to step 2 continuously
Step 1. 2000 cycle for difficult bending direction
Step 2. 3000 cycle for easy bending direction
RESULT: No cutting inner wire is acceptable
STEP1 STEP2
D. CORD BENDING TEST OF ADAPTOR SIDE
Test condition: 60’+60’=1 cycle, 30 cycle/1min, weight = 500g ,
from step 1 to step 2 continuously
Step 1. 500 cycle for difficult bending direction
Step 2. 500 cycle for easy bending direction
RESULT: No cutting inner wire is acceptable
8kgfx10s 5kgfx10s
5kgfx10s
5kgfx10s
5kgfx10s
60
60'
60'
60'