User Manual

3. Connections: Nord Stage rear panel NORD STAGE Eighty Eight V1.1x
Page 10
3. CONNECTIONS
NORD STAGE REAR PANEL
AUDIO CONNECTIONS
• Make all audio connections before turning on your power amplifier!
• All signal cables used with the Nord Stage must be shielded.
• The four audio outputs (CH O
UT
1-4)) are line level and unbalanced.
• If you wish to connect the Nord Stage in stereo to your audio equipment, you should use CH1 O
UT in
pair with C
H
2 O
UT
.
• You can also route individual instruments to CH O
UTPUTS 3 & 4 either in stereo or as two mono
channels. This is done on the System page - see page 60.
MIDI CONNECTIONS
• If you are using a Nord Stage together with a MIDI keyboard, connect a MIDI cable from MIDI Out
on the keyboard to MIDI I
N
on the Nord Stage.
• If you are using Nord Stage to control an external MIDI instrument, connect a MIDI cable from MIDI
O
UT on the Nord Stage to the MIDI In connector on the other instrument.