User's Manual

Displays, Indicators, and Controls

7 Navigation Buttons

These buttons are used to navigate between fields and scroll the

timescale.

(Up) and (Down): In menus, used to navigate between items. On

the monitoring screen, used to change the rSO

trendline timescale.

(Right): In menus, used to navigate between items. On the monitoring

screen, used to scroll forward in time in the current case.

(Left): In menus, used to navigate between items. In the monitoring

screen, used to scroll back in time in the current case.

(Select): See Select button description (#4) in this table.

8 Speaker

9 AC Power Adapter LED

This light-emitting diode (LED) indicator is lit when an external power supply provides

power to the device.

• Yellow – battery pack is charging

• Green – battery pack is fully charged

10 Power Adapter Input

Located on the bottom of the monitor below the AC power adapter LED, this input

connects the external power supply to the monitor.

11 Monitor Connector Port

Located on the front of the monitor, this port allows a X-100H hub or a single signal

processor to connect to the monitor.

12 Nurse Call Input

Located on the bottom of the monitor below the On/Standby button, this input connects a

nurse call cable to the monitor.

13 RS-232 Cable Input

Located on the back of the monitor (shown in figure 21).

Table 2: X-100M Features

No. Symbol Description

DRAFT 10 DEC 2012