Use and Care Manual

ManualsBrandsNone ManualsDo-It-Yourself toolsT124

Environmental protection 1

Description of symbols 1

Know Your Tool 2

Specications 2

Operating Instructions 3

Battery & Charging Procedure 3

TSG, Sleep Mode, Activating Tool,

Forward/Reverse, Variable Speed 4

2 Speed gearbox, Adjustable Torque control,

Drill Mode, Keyless chuck, Installing/removing bits 5

Power Consumption LED, Belt Clip, LED worklight,

Drill Overload, Temperature & Low voltage cut out 6

Drilling 7

General safety instruction 7-12

General Maintenance 13

Parts List 14

CONTENTS

Description of symbols

The rating plate on your tool may show symbols. These represent

important information about the product or instructions on its use.

Wear hearing protection

Wear eye protection

Wear breathing protection

Double insulated for additional protection.

Conformance to use the ETL mark

and complies with relevent standards

Conforms to relevant Electrical Stds and

electromagnetic requirements in Australia.

Read the instruction manual

Waste electrical products should not be

disposed of with household waste.

Conforms to relevant legislation and

safety standards.

Conforms to relevant GS Legislation

and safety Stds

Indoor use

MEPS Energy Performance Mark.

Li ion Battery recycle. Do Not dispose

of in house hold waste.

Max.use temperature

Conforms to relevant standards for

electromagnetic compatibility.

Environmental protection

Recycle unwanted materials instead of disposing of

them as waste. All tools, hoses and packaging should

be sorted, taken to the local recycling centre and

disposed of in an environmentally safe way.

This manual covers all T12 Series drill/drivers but is illustrated

with the 4A/h pack option for illustration purposes only.

T12 Series Drill/Drivers

5424

Summary of content (16 pages)

PAGE 1
T12 Series Drill/Drivers CONTENTS Description of symbols Environmental protection 1 Description of symbols 1 Know Your Tool 2 Specifications 2 Operating Instructions 3 Battery & Charging Procedure 3 TSG, Sleep Mode, Activating Tool, Forward/Reverse, Variable Speed 4 2 Speed gearbox, Adjustable Torque control, Drill Mode, Keyless chuck, Installing/removing bits 5 Power Consumption LED, Belt Clip, LED worklight, Drill Overload, Temperature & Low voltage cut out 6 Drilling 7 General safe
PAGE 2
Know Your Tool 1. Keyless chuck 2. Torque clutch 3. LED worklight 4. Forward Touch Pad 5. Reverse Touch Pad 6. High/low speed range selector 7. Power Consumption LED 8. Battery release button 9. Rechargeable Lithium-ion battery pack 10. Charger 11. Charging status indicator 12. Detachable cable & plug 13. Accessory mount Specifications 1. 6. 2. 7. 3. 4. 5. Motor: 12 V Low speed: n0-Lo = 0 – 440min-1 High speed: n0-Hi = 0 – 1450 min-1 Max. torque: 32 Nm Chuck: 0.8 - 13mm 0.
PAGE 3
OPERATING INSTRUCTIONS WARNING! CHARGER DIAGNOSTICS The charger is designed to detect certain problems that can arise with battery packs. • Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is enough to cause serve injury. • Before attempting to use this cordless drill, become familiar with all of its operating features and safety requirements.
PAGE 4
Touch Sensor Grip Power Tool FORWARD AND REVERSE CAUTION! To prevent damage to the gears, always Congratulations on purchasing a Touch Sensor Grip (TSG) Power tool. The TSG system incorporates a fully electronic control system which operates the tool on pressure applied to the Touch area, instantaneously allowing operation between Forward and reverse. allow the chuck to come to a complete stop before changing the direction of rotation.
PAGE 5
Two-speed gearbox To select the drill mode, rotate the torque clutch until the drill icon is aligned with the triangular indicator on the front face of the drill near the torque clutch. The high/low speed range selector allows you to select the gear with the optimum speed and torque to suit the application. Keyless chuck WARNING! Do not hold the body of the chuck with To select the LOW gear, 0-440 RPM (low speed, high torque setting), push the gear selector downward (toward the battery).
PAGE 6
LED worklight To reset the overload, simply remove all pressure from the TSG system and then reapply pressure on the TSG system to restart the tool. Resume work after the overload When the unit is switched on, the LED worklight also comes on to ensure better vision and to make working in dark areas safer. The worklight goes out when the TSG system is released.
PAGE 7
Drilling General safety instructions for handling power tools (European locations) WARNING: Read all safety warnings and all instructions. DRILLING METALS • Always clamp sheet metal. • Support thin metal with a block of wood to avoid distorting it. • Use a punch to mark the centre of the hole. • Use a suitable lubricant for the material you are working on.
PAGE 8
• When operating a power tool outdoors,use an extension cord suitable for outdoor use.Use of a cord suitable for outdoor reduces the risk of electric shock. • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
PAGE 9
• Store battery pack in well ventilated, dry and cool conditions, and avoid direct sunlight and rain. • Use only original 909 batteries with the voltage listed on the nameplate of your power tool. When using other batteries, e.g, imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries. 6). SERVICING • Have your power tool serviced by a qualified repair person using only identical replacement parts.
PAGE 10
Allowing dust to get into your mouth or eyes or to lie on the skin may promote absorption of harmful chemicals. • Do not open the battery. There is a risk of short-circuiting. • Protect the battery from heat, for example, from constant sun and fire. There is a risk of explosion. Work area safety • Never short circuit the battery. There is a risk of explosion. • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
PAGE 11
Personal safety • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. • Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
PAGE 12
• When the battery pack is not in use, keep it away • Accessories and tool may get hot during operation. Wear gloves when handling them if performing heat producing applications such as drilling metals. from objects that can create a connection between the terminals, such as paper clips, coins, keys, nails, screws or other small metal objects. Short-circuiting the Safety rules for battery pack and charger WARNING! This manual contains important safety and battery terminals may cause burns or a fire.
PAGE 13
For Lithium-ion battery pack storage longer than 30 days: WARNING! Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble. • Store the Lithium-ion battery pack where the temperature Is below 80 “F (26°C) and free of moisture. General maintenance • Store Lithium-ion battery packs in a 30%-50% charged condition. Avoid using solvents when cleaning plastic parts.
PAGE 14
Parts list 1. Screw 2. Chuck 3. Torque Sleeve 4. Printing ring 5. Gearbox assembly 6. Right Housing 7. Screw 8. Speed selector 9. Motor assembly 10. Brass cap 11. Click spring 12. Work Light LED cover 13. PCB Assembly 14. Screw 15. Steel ring support 16. Left housing 17. Battery pack 18. Charger 19. Power cord If any parts are missing or damaged, or if you have any questions, please email us at info@909.
PAGE 15
OTHER MODELS AVAILABLE: 12V Impact Driver 15
PAGE 16
909Powertools W: 909.com E: info@909.